I have a 94 SR5 4x4 truck with 3.0. I know the V6 third member is different than the 4 cyl, but my question is, are the axles different as well? What about brake drums and axles or the banjo housing? I have a complete banjo housing from a 93 4cyl truck with axles/ brake drums etc, less the third member with low miles in great shape. Overall it is in much better shape than what I have, wondering if I could swap parts?

 

Axle housing should be the same just thirds are different!

 

That's what I was thinking, is everything else listed the same? My truck has rear ABS and I imagine that the rear end I have is not, as it was from a 4 cyl. Are the ABS only different up front or are there ABS related parts in the rear? Axles and evrything else the same?

 

Come on guys, someone must have dealt with something similar to this?

 

As for the ABS stuff, why don't you just compair side by side? Everything should be the same. Unbolt the t-fitting on the brake line at the axle, and drop the axle. Then just bolt up the new one.

 

I have the spare stored at my mom's in her shed. I don't have access to it for a visual for a while as I won't be in that area. Thus can't do a side by side, which would be ideal. Still looking for thoughts on this before I make the trek to go get it.