Hello everybody.

I'm starting to resurrect my Toyota Chinook project. I originally finished and did a lot of RVing in this rig in 2009. It's now been sitting for a very long time so I'm cleaning it up and renovating it. I'll post some pictures of it soon.

I recently replace the carburetor and got this machine back up and running .

So the current point I'm at is installing new fenders. I am missing the original bolts which wouldn't be an issue for U clamp nuts on the top of the Fender but the issue I'm having is finding a bolt that fits the threads that are right into the body at the bottom of the Fender.

Any information will be greatly appreciated. I'm sure I'm gonna have a lot more questions along the way. Thank you!




1980 Toyota pickup lower front Fender bolt thread

 

I think it's probably Toyota 91631-40614 or 91631-40616. Here's some references so you can judge for yourself.
https://www.megazip.net/zapchasti-dl...nder-17831480#
https://www.toyotapartsdeal.com/part...nt_fender.html

 

it'll be 6mm X 1.25 thread ... 10MM head

 

thank you for the info. Those seem to be as rare as hens teeth. I've been searching online to purchase some and I cannot find one yet

 

any bolt store will have them , I have piles of them !+
If you weren't so far away , Id say pop by my shop and i'll give you some !

maybe pull one out of the top of the fender and take it in to the store

I would also suggest buying a tap , and chasing the threads .