Need help identifying a wire
#1
Registered User
Thread Starter
Join Date: Feb 2018
Location: TN
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Need help identifying a wire
I removed my intake yesterday, and after putting it back on I have a stray wire. It seems obvious, but I can't figure out what it connects to, even tried looking at the diagrams and no luck. Any ideas? It comes out right where the harness splits in the middle of the intake and is not very long. Truck is a 93 22re 4cyl
Last edited by Set to Stun; 02-16-2018 at 01:08 PM. Reason: more info
#2
Registered User
I am pretty sure that is a ground cable that attaches to the lower part of the upper intake.
Check out this thread for all 22RE ground locations: https://www.yotatech.com/forums/f116.../#&gid=1&pid=7
The picture below is from iamsuperbleeder's thread above:
Check out this thread for all 22RE ground locations: https://www.yotatech.com/forums/f116.../#&gid=1&pid=7
The picture below is from iamsuperbleeder's thread above:
Thread
Thread Starter
Forum
Replies
Last Post
mike0007
86-95 Trucks & 4Runners
7
03-21-2014 04:02 AM
brjason
Newbie Tech Section
7
03-14-2007 08:27 PM
jayster
95.5-2004 Tacomas & 96-2002 4Runners
4
08-31-2004 03:51 PM
megathunder
95.5-2004 Tacomas & 96-2002 4Runners
14
07-04-2004 08:40 AM