BTTF's 92 EXTRA CAB DLX
#105
Registered User
Thread Starter
Gott clean the insides as well. The tires are worn horribly. Cupping and uneven tread wear on all four. I can see why there are so many balance weights on each now.
#106
Registered User
Thread Starter
Before
After grinder wire wheel
Still need to hand wash, dry, and polish.
Much better. I didn't measure untill today but they are 3.75 backspacing. If memory serves me correctly that is the correct backspacing.
After grinder wire wheel
Still need to hand wash, dry, and polish.
Much better. I didn't measure untill today but they are 3.75 backspacing. If memory serves me correctly that is the correct backspacing.
#109
The balance between the black body and the chrome details is perfect. You have a nice truck!
#110
Registered User
Thread Starter
#114
Registered User
Thread Starter
Nice new purdy evaporator. Was a pain getting it reinstalled but wasn't terrible. Also got the new compressor and condenser installed as well. Pics to follow.
#116
Registered User
Thread Starter
Not bad for a 26 year old engine bay.
new A/C compressor, new Condenser, and new receiver/dryer. Can't wait to get the system tested and charged!
#118
Registered User
Thread Starter
Thanks! Lol...I wish it was and it certainly does look OEM but no. This radiator replaced the OEM one back in about 2000.
#120
Registered User
Thread Starter
Well it held vacuum but the hoses were leaking at the quick connections...dang. It blew cold long enough to tease me...then we had to evac it again.