YotaTech Forums

95.5-2004 Tacomas & 96-2002 4Runners 4th gen pickups and 3rd gen 4Runners

Rebuilding aisin hubs

Thread Tools
 
Search this Thread
 
Old Jan 17, 2003 | 01:22 PM
  #21  
Adam F's Avatar
Adam F
Registered User
 
Joined: May 2002
Posts: 2,479
Likes: 2
From: Cincinnati Ohio
I found the springs. Thanks guys!
Reply
0
Old Jun 16, 2006 | 05:14 AM
  #22  
cootees's Avatar
cootees
Contributing Member
 
Joined: Aug 2005
Posts: 984
Likes: 3
From: Roanoke Va
Originally Posted by Cebby
On mine, the big spring inside the hub (#8 in Adam's pic) is a little corroded. I managed to strip most of the corrosion, but the spring isn't a consistent thickness where the corrosion was (it is thinner there, metal eaten away by ?). There is no fear of it breaking cause it isn't THAT bad, but should I replace these? It still has sufficient power to push the innards like it should since it was working before I tore into it.
Cebby, what ever came of this? I have a spring in a spare set that I am rebuilding that is very similar sounding to yours. I'd prefer to replace it if I could but can't find any posts stating wether or not it could be replaced without having to pull one from a donor.
Reply
0
Old Jun 16, 2006 | 05:29 AM
  #23  
Cebby's Avatar
Cebby
Registered User
 
Joined: Sep 2002
Posts: 11,199
Likes: 2
From: Pittsburgh, PA
It had no effect on the operation of the hub. You'll be fine with the original.
Reply
0
Old Jun 16, 2006 | 06:10 AM
  #24  
1985 4Runner's Avatar
1985 4Runner
Contributing Member
 
Joined: Feb 2006
Posts: 1,876
Likes: 1
From: Gulfport, Mississippi
Great thread, just popped up in time too. My hub gears should be here soon.
Reply
0
Old Jun 16, 2006 | 06:30 AM
  #25  
cootees's Avatar
cootees
Contributing Member
 
Joined: Aug 2005
Posts: 984
Likes: 3
From: Roanoke Va
Originally Posted by Cebby
It had no effect on the operation of the hub. You'll be fine with the original.
Thanks. Just hoping you found somewhere to find a new spring for more ease of mind.
Reply
0
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
FS[PacNorWest]: 1992 4runner - 5VZ swap - Lifted
Swim
Vehicles - Trailers (Complete)
9
Jan 4, 2016 10:47 AM
First Time Head Gasket and Timing Chain Questions
_Nicco_
86-95 Trucks & 4Runners
35
Sep 21, 2015 03:06 PM
RuffStuff's LABOR DAY SALE!
Gravel Maker
RuffStuff
1
Sep 8, 2015 05:46 AM
FS[SouthEast]: Aisin factory hubs, cleaned and lubed
carlspeed
Axles - Suspensions - Tires - Wheels
5
Aug 23, 2015 02:59 PM
FS[GreatLakes]: Wanted: 4.88 front diff, rear 8'' 4.88
jaretstuff
Axles - Suspensions - Tires - Wheels
1
Aug 4, 2015 02:08 PM
Tags
Back to Subforum
95.5-2004 Tacomas & 96-2002 4Runners
View Next Unread
Lifting an 04 Double Cab Prerunner 2WD




Advanced Search

All times are GMT -8. The time now is 04:14 AM.