hello all

quick question: i'm running stock speakers all around with a very basic stereo set-up (cheapy after market head unit). i found that the installer (previous owner) had bypassed the OEM amp (seen here). is it worth wiring this back in? i'm not looking to bump heavy bass or anything but if the stock amp will help i will wire it back in. thanks

 

Why didnt you just ask this in your other thread

 

i did actually but it was so busy with the original question that i figured it would be best to start one on this subject (esp. since search turned up nothing).

 

If you are running an aftermarket deck, don't wire the amp back in.

Get a set of those $6 plugs off ebay, and wire the radio correctly so its plug and play. Otherwise you will have a tangled mess of wires.