as stated have the panels off and a set of type r's about to go in. dont know where to put the crossovers.

 

dexter, i put them under my passenger seat. i put velcro underneath so it doesnt slide around

bob

 

I cut up my factory mounts.
I couldn't/didn't want them under my seats cause of the blower for the rear heat.

 

Mine are under the armrest in the door.

 

I mounted mine in my glove box.

 

I took a piece of metal and made small extension like bracket and bolted them to the inside of the door panel near the hinge. There is some excess metal in there to bolt onto and close to the speaker location. hard to describe but its in the door near the hinge location.

I just posted my set up in that other thread..check it out.

JG

 

mine are sitting under my rear seat.
I have plans on mounting them in the back with the amps