Hi Guys,

I've hooked it all up but I'm pretty clueless when it comes to fine tuning of my system. Was hoping someone could suggest crossover settings for each set of channels on my PDX-5. Here is my setup:

Alpine PDX-5
http://www.alpine-usa.com/product/view/pdx-5

Channels 1-2
Jl VR650-CSi
http://mobile.jlaudio.com/products_c...hp?comp_id=127

Channels 3-4
Alpine SPR-13C
http://www.alpine-usa.com/product/view/spr-13c/

Channel 5
2 JL 10W1-8 subs
http://mobile.jlaudio.com/products_s...php?page_id=15

Head unit
Alpine CDA-9827
http://www.crutchfield.com/S-NaBdgbAB7Pa/p_500CDA9827/Alpine-CDA-9827.html

Here is a pic of the amp settings


Any help would be appreciated greatly, thanks in advance!!!

 

Ch. 1,2,3,4: 100hz to 120hz high pass
Sub: 80hz to 100hz low pass
Those are good starting points. Keep 1-4 the same!

 

Thanks!