ok... here is my problem. i took all of the emmission control, and just about all of the wiring off of my motor, replaced the carb with a weber and now i need to figure out the wiring for the alternator / charging system. This is in my rock buggy so i am not too concerned about much except for not being able to charge my battery... i know there are 5 wires total 1 large and 4 small from the plug, but where do they go? i still have the "charge light relay" if i need to put it in somewhere, but i have no clue. this is a motor from an 1985 toyota 4x4 pickup. If anyone has any answers or can let me know about a wiring diagram that i might study PLEASE let me know.

THANKS!