Notices
Vendor Advertising Vendor's, use this area to alert members to your OEM & Aftermarket Toyota parts

Toyota parts. Huge salvage yard. You want it? I have it!

Old Jan 19, 2015 | 02:55 PM
  #921  
dguzzi's Avatar
Registered User
 
Joined: May 2010
Posts: 9
Likes: 0
From: Michigan
2000 Tundra

Hoping you have a drivers seat, fawn color (tan) I need the entire chair (drivers side) from the 60/40 interior. Shipping to Michigan 48137 thank you!
Old Jan 19, 2015 | 04:48 PM
  #922  
stevez's Avatar
Registered User
 
Joined: Jan 2015
Posts: 1
Likes: 0
1995 toyota t100

Iv got a 1995 toyota t100 dx long bed 4x4 5spd that needs a gas tank. Iv called around to all my local scrap yards and nobody has one. Anyone know if any other yotas are interchangeable with mine? The dealer wants crazy $$$$ for a new one and I can't see myself spending more on a gas tank than I did for the truck.
Old Jan 20, 2015 | 05:44 AM
  #923  
zgcoCruiser's Avatar
Registered User
 
Joined: Jan 2015
Posts: 1
Likes: 0
From: Colorado and Maryland
2006-07 Land Cruiser OEM wheels?

Hey - I know that these things are kinda rare but I'm doing a full facelift on my '04. The OEM wheel design and lug nut patterns are the same from '03 to '07 but the OEM color changed in '06 to a darker, yet more metallic-looking finish (I'm being OCD about accuracy of the facelift).

It seems impossible to track down the paint code for these 06-07 wheels so I'm trying to source some used OEMs - also seemingly impossible. Any insight?

It's a little hard to tell, but this rig has the 06-07 wheel color: http://www.ebay.com/itm/2006-Toyota-...-/331401375463

Thanks!
Old Jan 21, 2015 | 04:15 AM
  #924  
x4xRunner's Avatar
Registered User
 
Joined: Dec 2014
Posts: 79
Likes: 0
I'm looking for the "c" channel roller guide that goes on the bottom of the rear window that attaches to the regulator. I've got an 86 4Runner.
Thanks
Old Jan 23, 2015 | 05:28 PM
  #925  
broncotoyo's Avatar
Registered User
 
Joined: Jun 2014
Posts: 35
Likes: 0
From: Portland Or.
bet you don t have a knock sensor 1987 22re
Old Jan 27, 2015 | 08:58 PM
  #926  
tonkatruck_79's Avatar
Registered User
 
Joined: Jan 2015
Posts: 81
Likes: 0
Do you have access to the first gen clinometer adjustment knobs? I'm missing one.
Old Jan 28, 2015 | 07:31 PM
  #927  
tonetone's Avatar
Registered User
 
Joined: Apr 2013
Posts: 18
Likes: 0
yes my good man, I am in need of some g52 Transmission parts for a conversion from an auto:
*fork w boot
*Flywheel mounting bolts
*Trans shifter & shifter base/bolts
*xfer case shifter & base/bolts
*boots for shifters.
*hydraulic line and bracket between clutch master and slave cylinder.
*clutch pedal assy

shipped to 33565
Old Jan 29, 2015 | 04:54 AM
  #928  
Dan0280's Avatar
Registered User
 
Joined: Jan 2015
Posts: 1
Likes: 0
4th generation 4runner Limited 18" spare wheel shipping to 07114. Thank you.
Old Jan 30, 2015 | 12:12 AM
  #929  
ames485's Avatar
Registered User
 
Joined: Jan 2015
Posts: 13
Likes: 0
From: NJ
1989 22re 4runner
Gray interior

I need the shifter bezel surround w/shift boot assembly

This piece

Name:  20130804_180139.jpg
Views: 168
Size:  2.37 MB

PM me a price if you have one available
Old Jan 30, 2015 | 07:35 AM
  #930  
tonetone's Avatar
Registered User
 
Joined: Apr 2013
Posts: 18
Likes: 0
Originally Posted by tonetone
yes my good man, I am in need of some g52 Transmission parts for a conversion from an auto:
*fork w boot
*Flywheel mounting bolts
*Trans shifter & shifter base/bolts
*xfer case shifter & base/bolts
*boots for shifters.
*hydraulic line and bracket between clutch master and slave cylinder.
*clutch pedal assy

shipped to 33565
Would also like to get a quote for the entire manual transmission/ xfer case for pretty much any year 5 speed that came behind a 22r or re. thinking for what im looking to get these parts for + the price of the picked clean g52 unit I have in mind for local pick up, I may be better off getting it all from you if its available.

shipped to 33565.
Old Jan 30, 2015 | 07:39 AM
  #931  
x4xRunner's Avatar
Registered User
 
Joined: Dec 2014
Posts: 79
Likes: 0
You can hear crickets chirping it's so quiet in here
Old Jan 30, 2015 | 11:47 AM
  #932  
tonkatruck_79's Avatar
Registered User
 
Joined: Jan 2015
Posts: 81
Likes: 0
Originally Posted by x4xRunner
You can hear crickets chirping it's so quiet in here
For real haha
Old Feb 3, 2015 | 08:59 PM
  #933  
mightymouse's Avatar
Thread Starter
Registered User
iTrader: (6)
 
Joined: Apr 2009
Posts: 1,756
Likes: 12
From: high ridge
Originally Posted by dguzzi
Hoping you have a drivers seat, fawn color (tan) I need the entire chair (drivers side) from the 60/40 interior. Shipping to Michigan 48137 thank you!
no go on the tundra sir sorry.
Old Feb 3, 2015 | 09:00 PM
  #934  
mightymouse's Avatar
Thread Starter
Registered User
iTrader: (6)
 
Joined: Apr 2009
Posts: 1,756
Likes: 12
From: high ridge
Originally Posted by stevez
Iv got a 1995 toyota t100 dx long bed 4x4 5spd that needs a gas tank. Iv called around to all my local scrap yards and nobody has one. Anyone know if any other yotas are interchangeable with mine? The dealer wants crazy $$$$ for a new one and I can't see myself spending more on a gas tank than I did for the truck.
no t100's sorry
Old Feb 3, 2015 | 09:01 PM
  #935  
mightymouse's Avatar
Thread Starter
Registered User
iTrader: (6)
 
Joined: Apr 2009
Posts: 1,756
Likes: 12
From: high ridge
Originally Posted by zgcoCruiser
Hey - I know that these things are kinda rare but I'm doing a full facelift on my '04. The OEM wheel design and lug nut patterns are the same from '03 to '07 but the OEM color changed in '06 to a darker, yet more metallic-looking finish (I'm being OCD about accuracy of the facelift).

It seems impossible to track down the paint code for these 06-07 wheels so I'm trying to source some used OEMs - also seemingly impossible. Any insight?

It's a little hard to tell, but this rig has the 06-07 wheel color: http://www.ebay.com/itm/2006-Toyota-...-/331401375463

Thanks!
i only have a few cruisers and none that will help you there.
Old Feb 3, 2015 | 09:02 PM
  #936  
mightymouse's Avatar
Thread Starter
Registered User
iTrader: (6)
 
Joined: Apr 2009
Posts: 1,756
Likes: 12
From: high ridge
Originally Posted by broncotoyo
bet you don t have a knock sensor 1987 22re
betcha i do
Old Feb 3, 2015 | 09:03 PM
  #937  
mightymouse's Avatar
Thread Starter
Registered User
iTrader: (6)
 
Joined: Apr 2009
Posts: 1,756
Likes: 12
From: high ridge
Originally Posted by tonkatruck_79
Do you have access to the first gen clinometer adjustment knobs? I'm missing one.
yup! year, model engine ect ect. where am i shipping.
Old Feb 3, 2015 | 09:06 PM
  #938  
mightymouse's Avatar
Thread Starter
Registered User
iTrader: (6)
 
Joined: Apr 2009
Posts: 1,756
Likes: 12
From: high ridge
Originally Posted by Dan0280
4th generation 4runner Limited 18" spare wheel shipping to 07114. Thank you.
from here on out when i get requests like this i skip them no questions asked there is no way i can waste time with this. I ask for some minimum requirements and this doesnt even come close.
Old Feb 3, 2015 | 09:07 PM
  #939  
mightymouse's Avatar
Thread Starter
Registered User
iTrader: (6)
 
Joined: Apr 2009
Posts: 1,756
Likes: 12
From: high ridge
Originally Posted by x4xRunner
You can hear crickets chirping it's so quiet in here
crickets come and tell me a shipping address and an engine trans ect ect that is required for a quote. Read the very first post on the thread cricket boy.
Old Feb 3, 2015 | 09:09 PM
  #940  
mightymouse's Avatar
Thread Starter
Registered User
iTrader: (6)
 
Joined: Apr 2009
Posts: 1,756
Likes: 12
From: high ridge
Originally Posted by tonkatruck_79
For real haha
you're in the same boat as cricket boy. read the first post and get back to me. for real haha

Thread Tools
Search this Thread

All times are GMT -8. The time now is 03:51 PM.