Notices
Vendor Advertising Vendor's, use this area to alert members to your OEM & Aftermarket Toyota parts

Toyota parts. Huge salvage yard. You want it? I have it!

Old Oct 26, 2014 | 09:28 AM
  #861  
smp86runner's Avatar
Registered User
 
Joined: Oct 2014
Posts: 2
Likes: 0
From: Ohio
86 4Runner 22re 4X4 5speed Grey interior. I need 2 front seats with tracks and bolts if possible, both door mirrors, rear door "Toyota" trim panel with mounts and hardware, altimeter inclinometer and tilt gauge with connector bracket and hardware, both front fenders. 5676 Broadview Road Apt 212, Parma, Ohio 44134
Old Oct 26, 2014 | 09:35 AM
  #862  
zombie_stomp's Avatar
Registered User
 
Joined: Oct 2014
Posts: 239
Likes: 1
Any steel 6 lug rims? Set of 4 or 5 would be fine. I am hoping for the really plain looking white painted steel ones, but open to any 6-lug factory toyota rims especially if appropriate for 1982. Zip code 27510.
Old Oct 28, 2014 | 06:05 PM
  #863  
Fun4all's Avatar
Registered User
 
Joined: Oct 2014
Posts: 6
Likes: 0
Looking for the lower box of the air filter box for a 1990 4runner 22re 4x4 manual. If available it will be shipped to 35210. Thanks
Old Oct 29, 2014 | 04:47 PM
  #864  
atvlifestyle's Avatar
Registered User
 
Joined: Apr 2012
Posts: 8
Likes: 0
From: Stevensville, MI
Looking for a R150F 5 speed transmission for a 2001 Tacoma 3.4 4X4 shipped to 49127.
Old Nov 1, 2014 | 02:12 PM
  #865  
Rafterman191's Avatar
Registered User
 
Joined: Nov 2014
Posts: 26
Likes: 0
From: Indiana
Engine harness, knock sensor wiring, maybe an ECM, all for '93 4Runner 3vze shipped to 47804 about 100 miles east of you. ETA need 2 center caps in black.

Last edited by Rafterman191; Nov 1, 2014 at 05:07 PM.
Old Nov 4, 2014 | 12:18 PM
  #866  
bgordon45's Avatar
Registered User
 
Joined: Jul 2009
Posts: 35
Likes: 0
From: Carbondale, CO
driver's seatbelt, seatbelt receiver, and lock cowl

1993 Pickup DLX ext. cab 4x4 w/ grey interior

I'm looking for a driver's side seatbelt, as well as a seat belt receiver for bucket seats.

Also looking for a cowl on the driver's side door lock - it's the little plastic ring that goes around the lock.

shipping to 81623
Old Nov 4, 2014 | 12:56 PM
  #867  
1986 4ranner's Avatar
Registered User
 
Joined: Oct 2014
Posts: 11
Likes: 0
From: Chino california
1986 4runner sunroof ship to 91710 thanks
Old Nov 9, 2014 | 01:55 PM
  #868  
daylight's Avatar
Registered User
 
Joined: Jul 2013
Posts: 10
Likes: 0
From: tucson AZ
Question headlight assm.

howdy have a 97 4runner sr5 need if possible headlight assm the diamond cut ones with glass lens?

thanks gil
Old Nov 9, 2014 | 08:05 PM
  #869  
DBD x509x's Avatar
Registered User
 
Joined: Jan 2013
Posts: 11
Likes: 0
From: Spokane, Wa
Looking for parts for the following :

year:1984
Make:Toyota
model: Pickup
trim package: STD cab and BASE trim.

looking for headers and a 3" lift kit
33x12.5x15

Located in spokane, wa 99212
Old Nov 10, 2014 | 02:05 PM
  #870  
Budman1's Avatar
Registered User
 
Joined: Oct 2014
Posts: 84
Likes: 1
From: Sebastian, FL
3.0 vze, exhaust headers, or modified manifolds

eliminating crossover

Thanks,
Bud
Old Nov 10, 2014 | 03:24 PM
  #871  
scoit2000's Avatar
Registered User
 
Joined: Nov 2014
Posts: 2
Likes: 0
Looking for the a/c line that is in the evaporator case. Attaches to the expansion valve and then goes through the firewall, has the low psi switch on it. Truck is a 95 pickup, shipped to 95426.

Thanks

Last edited by scoit2000; Nov 10, 2014 at 07:49 PM.
Old Nov 12, 2014 | 06:53 AM
  #872  
Danny3's Avatar
Registered User
 
Joined: Aug 2014
Posts: 6
Likes: 0
Hey friend I'm looking for both door vent assemblies with the glass if possible and some grey door panels truck is a 86 base turbo 4x4 single cab can u also find the toyota turbo EFI badges shipped 2 92647 thanks
Attached Thumbnails Toyota parts. Huge salvage yard. You want it? I have it!-image.jpg  
Old Nov 13, 2014 | 09:34 AM
  #873  
AROC's Avatar
Registered User
 
Joined: Apr 2011
Posts: 28
Likes: 0
Looking for SR5 Tachometer and Speedometer Dashboard Cluster (5speed *Not Automatic*) for a 1984-1988 body pick up shipped to 85260 and also an inclinometer if you have one
Old Nov 16, 2014 | 05:53 PM
  #874  
bvet4dog's Avatar
Registered User
 
Joined: Sep 2009
Posts: 205
Likes: 0
From: maine
Looking for

front/rear bumper to go on 99 sr5 manual and maybe rear axle if i cant fix the rusted housing. This is going to be daily driver soon, so i need them to be decent shape and pass inspection.

Shipped to 04345

Thanks
Old Nov 17, 2014 | 05:47 AM
  #875  
ravip92's Avatar
Registered User
 
Joined: Nov 2014
Posts: 2
Likes: 0
96 Brush Guard?
Old Nov 21, 2014 | 06:04 PM
  #876  
sphealy's Avatar
Registered User
iTrader: (1)
 
Joined: Jan 2014
Posts: 241
Likes: 0
From: North Carolina
Looking for 1997 4runner ecu m/t 4x4 shipped to 28034
Old Dec 3, 2014 | 04:30 AM
  #877  
mightymouse's Avatar
Thread Starter
Registered User
iTrader: (6)
 
Joined: Apr 2009
Posts: 1,756
Likes: 12
From: high ridge
Originally Posted by ravip92
96 Brush Guard?
too vague help me out here
Old Dec 3, 2014 | 04:31 AM
  #878  
mightymouse's Avatar
Thread Starter
Registered User
iTrader: (6)
 
Joined: Apr 2009
Posts: 1,756
Likes: 12
From: high ridge
Originally Posted by bvet4dog
Looking for

front/rear bumper to go on 99 sr5 manual and maybe rear axle if i cant fix the rusted housing. This is going to be daily driver soon, so i need them to be decent shape and pass inspection.

Shipped to 04345

Thanks
let me know ion the axle and we can see if i can use a pallet for shipping
Old Dec 3, 2014 | 04:33 AM
  #879  
mightymouse's Avatar
Thread Starter
Registered User
iTrader: (6)
 
Joined: Apr 2009
Posts: 1,756
Likes: 12
From: high ridge
Originally Posted by AROC
Looking for SR5 Tachometer and Speedometer Dashboard Cluster (5speed *Not Automatic*) for a 1984-1988 body pick up shipped to 85260 and also an inclinometer if you have one
shouldnt be a problem. what color on the inclinometer? is this for the 88 in your sig?
Old Dec 3, 2014 | 04:35 AM
  #880  
mightymouse's Avatar
Thread Starter
Registered User
iTrader: (6)
 
Joined: Apr 2009
Posts: 1,756
Likes: 12
From: high ridge
Originally Posted by scoit2000
Looking for the a/c line that is in the evaporator case. Attaches to the expansion valve and then goes through the firewall, has the low psi switch on it. Truck is a 95 pickup, shipped to 95426.

Thanks
engine and trans please.

Thread Tools
Search this Thread

All times are GMT -8. The time now is 03:51 PM.