Toyota parts. Huge salvage yard. You want it? I have it!
#764
Need a 3.0L engine harness
Hey,
I need a 93 toyota truck engine harness. AT 4X4 3vzfe. Please give me a call at (828)-773-Three Eight Zero Zero.
Thanks
Justin
I need a 93 toyota truck engine harness. AT 4X4 3vzfe. Please give me a call at (828)-773-Three Eight Zero Zero.
Thanks
Justin
#765
Locking Hub rear end
Was thinking about swapping in a rear end with locking hubs on my 87 2wd standard pickup to make it super easy to tow. Do you have something like that. I can figure out the swap. I'm just looking for locking hubs I can adapt to my rear end or possibly the better solution would be a complete rearend.
#766
Hi I was wondering if you would have all the parts needed to add Air conditioning to my 94 toyota pickup 22RE 4x4. I'm not sure of all the parts I neef, but I know I need:
Compressor
Compressor bracket plus tensioner
Condenser
The air box under the dash
Dryer
Ac on off switch
Ac lines
Idle up valve
Wiring?
Thanks
Compressor
Compressor bracket plus tensioner
Condenser
The air box under the dash
Dryer
Ac on off switch
Ac lines
Idle up valve
Wiring?
Thanks
Last edited by Jaymann27; Jul 28, 2014 at 09:20 PM.
#767
Thread Starter
Registered User
iTrader: (6)
Joined: Apr 2009
Posts: 1,756
Likes: 12
From: high ridge
Hi I was wondering if you would have all the parts needed to add Air conditioning to my 93 toyota pickup 22RE 4x4. I'm not sure of all the parts I neef, but I know I need:
Compressor
Compressor bracket plus tensioner
Condenser
The air box under the dash
Dryer
Ac on off switch
Ac lines
Idle up valve
Wiring?
Thanks
Compressor
Compressor bracket plus tensioner
Condenser
The air box under the dash
Dryer
Ac on off switch
Ac lines
Idle up valve
Wiring?
Thanks
#768
Thread Starter
Registered User
iTrader: (6)
Joined: Apr 2009
Posts: 1,756
Likes: 12
From: high ridge
Was thinking about swapping in a rear end with locking hubs on my 87 2wd standard pickup to make it super easy to tow. Do you have something like that. I can figure out the swap. I'm just looking for locking hubs I can adapt to my rear end or possibly the better solution would be a complete rearend.
#769
I need a factory clock for 2000 4runner, ship to 23454 VA Beach.
Thanks!!
Thanks!!
Last edited by Nene92; Jul 25, 2014 at 01:56 PM.
#770
Compressor
Compressor bracket plus tensioner
Condenser
The air box under the dash plus associateed bracket
Evaporator core (I'm pretty sure this is with the air box)
Ac on off switch plus wiring for the switch
Ac lines
Idle up valve
Expansion valve
AC Amplifier
PM me a quote plus shipping to zip code 97701
Thanks
#771
Thread Starter
Registered User
iTrader: (6)
Joined: Apr 2009
Posts: 1,756
Likes: 12
From: high ridge
For those of you just joining us as this thread is getting a little steam i wanted to give a bit of a refresher on parts request etiquette. For those new to the "i need a part request game" there are a few guide lines that have to be followed to get you a proper request.
First when sending a request or just posting in the thread please be sure to be thorough. To get you the right parts remember i need to know things like color, gears, and maybe what you are doing with it.
a good template to follow would be
year. not a range of years that will work but the year you want the part from
make. that's the simple one i only sell toyota parts
model and color if needed body specifics I.E. extra cab reg cab 2 door 4door.
trim package and color.
auto/manual
4x4/2wd
motor
what you want and what you plan o doing
shipping address or just your zip
I can get a fast quote with this and get you what you need for your truck or 4runner fast.
I might quote this when i bump the thread, not to be condescending, but to keep it simple and organized. Last i can't go through the yard taking pictures. They don't let me and i can't. If that is going to be a big hang up to you better to know now and not ask for a part than to try and convince me to do otherwise. I have so far texted, pm'd and even called people to assure them i will in fact send them the part they are paying for. Thank you very much to those of you that have purchased so far. This has been fun.
First when sending a request or just posting in the thread please be sure to be thorough. To get you the right parts remember i need to know things like color, gears, and maybe what you are doing with it.
a good template to follow would be
year. not a range of years that will work but the year you want the part from
make. that's the simple one i only sell toyota parts
model and color if needed body specifics I.E. extra cab reg cab 2 door 4door.
trim package and color.
auto/manual
4x4/2wd
motor
what you want and what you plan o doing
shipping address or just your zip
I can get a fast quote with this and get you what you need for your truck or 4runner fast.
I might quote this when i bump the thread, not to be condescending, but to keep it simple and organized. Last i can't go through the yard taking pictures. They don't let me and i can't. If that is going to be a big hang up to you better to know now and not ask for a part than to try and convince me to do otherwise. I have so far texted, pm'd and even called people to assure them i will in fact send them the part they are paying for. Thank you very much to those of you that have purchased so far. This has been fun.
#772
2000 tundra extended cab 4.7l 4x4 auto natural white. im looking for the following shipped to a commerical address 14506 can be freight if needed and have a forklift available to unload.
hood
both fenders with flares (dont care either way
grill
radiator core support
and if possible with a separate shipping quote
tan leather (prefer power) front bucket seats with
sequioa or double cab center console also in tan
thank you!!
hood
both fenders with flares (dont care either way
grill
radiator core support
and if possible with a separate shipping quote
tan leather (prefer power) front bucket seats with
sequioa or double cab center console also in tan
thank you!!
#773
I did a little research and I need:
Compressor
Compressor bracket plus tensioner
Condenser
The air box under the dash plus associateed bracket
Evaporator core (I'm pretty sure this is with the air box)
Ac on off switch plus wiring for the switch
Ac lines
Idle up valve
Expansion valve
AC Amplifier
PM me a quote plus shipping to zip code 97701
Thanks
Compressor
Compressor bracket plus tensioner
Condenser
The air box under the dash plus associateed bracket
Evaporator core (I'm pretty sure this is with the air box)
Ac on off switch plus wiring for the switch
Ac lines
Idle up valve
Expansion valve
AC Amplifier
PM me a quote plus shipping to zip code 97701
Thanks
AC Compressor And compressor mounting bracket (1 groove pulley)
Idle up valve
That's what I still need. PM me a quote plus shipping to US zip code 97701
Thanks,
Jason
#774
What do you have available for boxes? I have an 87 toyota pickup 4wd. The truck is that cream/tan color. I'd probably have to plan a trip from Iowa to pick it up, just seeing what's available.
I'm also looking for brown door panels for a door that has crank windows. Both driver and passenger sides
I'm also looking for brown door panels for a door that has crank windows. Both driver and passenger sides
Last edited by Phantez; Aug 5, 2014 at 02:19 PM.
#775
Looking for parts for 02 Toyota Sequoia Limited
89245-0C010 - Steering Sensor
81521-0C020 - Turn Signal Housing
And if possible these seat parts
71876-0C060-B0
71806-0C010-B0
71875-0C060-B0
71805-0C010-B0
ship to TX 77339
89245-0C010 - Steering Sensor
81521-0C020 - Turn Signal Housing
And if possible these seat parts
71876-0C060-B0
71806-0C010-B0
71875-0C060-B0
71805-0C010-B0
ship to TX 77339
#776
Thread Starter
Registered User
iTrader: (6)
Joined: Apr 2009
Posts: 1,756
Likes: 12
From: high ridge
Just caught up. For those of you sending me email feel free to do so but it might take me a bit to sort through. For the rest just reply to this thread with your year, model, specifics to your drive train, color, ect ect and anything else that will help me and i'll get you a quote asap. Thanks for the support!
#779
Hey Mighty, looking for an engine temperature gauge for my 1995 T100 DX Extended Cab (tan interior). I would also take an entire instrument cluster from a DX OR an SR5 if getting just the one gauge out is too much hassle. The gauge I have now isn't working...
I live in Missoula MT, zip = 59801.
I live in Missoula MT, zip = 59801.
#780
1987 toyota pickup standard cab 4x4 22r 5 speed.
I need a g52 transmission to replace mine with thanks. My zipcode is 28772
I need a g52 transmission to replace mine with thanks. My zipcode is 28772


