Toyota parts. Huge salvage yard. You want it? I have it!
#503
center console
color doesn't matter as long as it is complete with the trim around the shifter, and the console is the one that would have came with the truck, double stack style would be nice if you have it don't know if that style would have been available for my truck so please let me know thank you
#504
Hello,
I just bought an 85 toyota ext cab and it needs a little work, i am looking to get a section from the drivers cab corner cut out and maybe even a section of the box front corner on the drivers side. What are the chances you have something like this. I can also us a reg cab section its the portion surounding the door that is mangled the most.
thanks
I just bought an 85 toyota ext cab and it needs a little work, i am looking to get a section from the drivers cab corner cut out and maybe even a section of the box front corner on the drivers side. What are the chances you have something like this. I can also us a reg cab section its the portion surounding the door that is mangled the most.
thanks
Last edited by KyleD403; Jan 20, 2014 at 08:41 AM.
#505
4 runner interior parts
Looking for the tailgate interior trim, the piece that covers the window actuator and all related trim that mounts to this tailgate/hatch. I need a gray color. Also looking for the hatch window switch mounted in the center console and also a good gray center console.
#506
Thread Starter
Registered User
iTrader: (6)
Joined: Apr 2009
Posts: 1,756
Likes: 12
From: high ridge
Looking for the tailgate interior trim, the piece that covers the window actuator and all related trim that mounts to this tailgate/hatch. I need a gray color. Also looking for the hatch window switch mounted in the center console and also a good gray center console.
#507
Interior
Do you have a 3rd member with 4.11 or 4.59 with e-locker come from a 4 runner?
#508
Do you have the following for an 86 pickup
- a set of locks ( two doors + ignition + key )
- the upper and lower trim piece from around the steering column in black
- Clutch start cancel switch ( for the dash )
- Clutch pedal start switch ( for the pedal assembly )
- Blower motor resistor
- Tailgate handle assembly. Just the bits in the middle, not the latching mechanisms on the sides.
Shipped to Canada, T2W3J5
- a set of locks ( two doors + ignition + key )
- the upper and lower trim piece from around the steering column in black
- Clutch start cancel switch ( for the dash )
- Clutch pedal start switch ( for the pedal assembly )
- Blower motor resistor
- Tailgate handle assembly. Just the bits in the middle, not the latching mechanisms on the sides.
Shipped to Canada, T2W3J5
#509
Parts
Have been searching high and low for these 2 things on the used 1998 Tacoma Limited I picked up a year ago. All pull a part locations near me are worthless.
Full antenna kit to replace the aftermarket junk. Mainly the in-fender piece. Toyota part 86300-35090 as far as I know.
Center arm wrest top with hinge in blue.
Andy
Shipped to Atlanta 30052
Full antenna kit to replace the aftermarket junk. Mainly the in-fender piece. Toyota part 86300-35090 as far as I know.
Center arm wrest top with hinge in blue.
Andy
Shipped to Atlanta 30052
Last edited by cannarella; Feb 1, 2014 at 06:32 AM.
#510
Lookin for 2012 Corolla S passenger side from bumper spoiler in white. This is just the corner piece. Ship to 91387
#512
I need manual locking hubs 85 solid axle u bolt setup for solid axle complete for the same axle tcase and tranny knobs 5 speed glove box with low range sticker 86 single cab pickup shock hoops and 86 single cab doors with speaker slots 2 seat belts ship to oceanside CA 92058 prices individually please
#514
Thread Starter
Registered User
iTrader: (6)
Joined: Apr 2009
Posts: 1,756
Likes: 12
From: high ridge
I need manual locking hubs 85 solid axle u bolt setup for solid axle complete for the same axle tcase and tranny knobs 5 speed glove box with low range sticker 86 single cab pickup shock hoops and 86 single cab doors with speaker slots 2 seat belts ship to oceanside CA 92058 prices individually please
1985 solid axle hubs. (what vehicle)(what axle)
u bolt for solid axle complete for the same axle (again what vehicle)(what axle)
t-case and transmission knobs 5 speed(what vehicle including trim package)
glove box with low range sticker (vehicle model, color, year ect ect)
86 single cab pickup shock hoops ( don't know what you mean for shock hoops on a stock pickup but at least you gave me a year to work with) (specify 2wd or 4wd ect ect)
86 single cab doors with speaker slots (same stuff as before and what do you mean when you ask for speaker slots)
2 seat belts (color, vehicle ...... you get the point)
If you could get me a complete list and fill in the gaps i'm a little lost on i will get you some quotes. If quoted individually it will cost quite a bit more. Keep that in mind in regards to shipping. Also in regards to shipping doors be aware they will cost a pretty penny to get them to you in california. Thanks for the interest.
#516
Red, 1986 single cab Toyota pickup 4x4 22R brown interior the axle is out of and 85 pickup it has one manual lock on one side and an auto lock on the other thats all I know shock hoops are aftermarket also need 14 inch shocks for the front forget the doors trim is std base model
#517
Youd be shipping to 03079
#518
Hey Mightymouse I'm looking for right and left front fender for an 1987 Toyota 4x4 regular cab pickup.Must be dent free and rust free,oem only,no aftermarket.Also a rust free battery tray.Shipped to 04038.Thank you so much
#519
Looking for a Class 3 hitch (2" receiver) for a 94 pickup DLX 4wd standard cab, shipped to Maybrook, NY 12543
#520
Rear main drive shaft for 94 22re manual 4x4
Hi, looking for a rear main drive shaft for a 94 4Runner SR5 4x4. Manual transmission with a 22re engine.
Thanks
Hi, looking for a rear main drive shaft for a 94 4Runner SR5 4x4. Manual transmission with a 22re engine.
Thanks


