89silverpu Fab - winch bolt lock security system and more
08-19-2010, 07:14 PM
#41
Registered User
Thread Starter
Join Date: Feb 2007
Location: Sierra Nevada's or the Deserts of Las Vegas
Posts: 2,203
Likes: 0
Received 0 Likes
on
0 Posts
I have not made a hi lift mount yet because no one has asked for one yet, and I have a mount for my hi lift already...what kind would you need? I have a couple ideas for bed mounts, I'm pretty sure I could make a stock rollbar type mount too. Basically let me know what you're looking for and I could most likely make it up.
Your winch should have come with mounting bolts for the 3 w/o the lock box 
3/4" would be too short. Use the bolts that come with the winch for the 3 others and get a bolt that is 5 to 10mm longer than that depending on which type of washers you are using. and that should do the trick.
3/4" would be too short. Use the bolts that come with the winch for the 3 others and get a bolt that is 5 to 10mm longer than that depending on which type of washers you are using. and that should do the trick.
08-19-2010, 07:16 PM
#42
Registered User
Thread Starter
Join Date: Feb 2007
Location: Sierra Nevada's or the Deserts of Las Vegas
Posts: 2,203
Likes: 0
Received 0 Likes
on
0 Posts
Bump....send me a pm with an offer. Orders with more than one item get a discount, and something that I haven't made for someone yet...ie. Hi lift mount, jerry can bed mount, whatever you may need that I may have not sold...get a discount for being the first to buy it.
08-20-2010, 06:38 AM
#43
Registered User
Join Date: Jun 2009
Location: North Carolina
Posts: 414
Likes: 0
Received 0 Likes
on
0 Posts
Your winch should have come with mounting bolts for the 3 w/o the lock box 3/4" would be too short. Use the bolts that come with the winch for the 3 others and get a bolt that is 5 to 10mm longer than that depending on which type of washers you are using. and that should do the trick.
3/4" would be too short. Use the bolts that come with the winch for the 3 others and get a bolt that is 5 to 10mm longer than that depending on which type of washers you are using. and that should do the trick.
09-14-2010, 06:30 PM
#46
Registered User
Thread Starter
Join Date: Feb 2007
Location: Sierra Nevada's or the Deserts of Las Vegas
Posts: 2,203
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, sounds good, and I haven't made any center consoles. I haven't been able to come up with a design that would be competative with the other options out there price wise.
09-14-2010, 08:05 PM
#48
Registered User
Thread Starter
Join Date: Feb 2007
Location: Sierra Nevada's or the Deserts of Las Vegas
Posts: 2,203
Likes: 0
Received 0 Likes
on
0 Posts
04-12-2011, 04:09 PM
#51
Registered User
Thread Starter
Join Date: Feb 2007
Location: Sierra Nevada's or the Deserts of Las Vegas
Posts: 2,203
Likes: 0
Received 0 Likes
on
0 Posts
Well, I finally have gotten my house and garage all in order since moving everything to vegas and am now taking orders again for everything in this thread, or anything you may have in mind. Shoot me a PM and I'll give you a quote plus shipping.
04-16-2011, 06:34 PM
#57
Registered User
Thread Starter
Join Date: Feb 2007
Location: Sierra Nevada's or the Deserts of Las Vegas
Posts: 2,203
Likes: 0
Received 0 Likes
on
0 Posts
Bump! I need a project for next week, pm me about anything and I'll make you an offer. I'm thinking about making a cb mount that utilizes the stock tie downs in the bed of our trucks if anyone would be interested in that I'll give you a first purchaser deal.
04-17-2011, 09:47 PM
#58
Registered User
Thread Starter
Join Date: Feb 2007
Location: Sierra Nevada's or the Deserts of Las Vegas
Posts: 2,203
Likes: 0
Received 0 Likes
on
0 Posts
If you're in Vegas, I can weld up sliders, build a rear bumper like the one in my build thread, or do any other welding on your rig that needs to be done with the vehicle present for a really good price! Just shoot me a pm if you're interested!
