99+ Tundra, 00+ Sequoia, 98+ Land Cruiser/LX470 Late model full size trucks and SUVs

Weird Sound

Old Mar 1, 2005 | 07:57 PM
  #1  
Tato97T100's Avatar
Thread Starter
Registered User
 
Joined: Feb 2005
Posts: 85
Likes: 0
From: I live in So. California
Weird Sound

This problem is on a 97 T100 SR5 V6 3.4L 2WD EXT. CAB

I am experienceing a weird sound at slow speeds (well thats the only time i can hear it). Its as if the tire was rubbing on something-but it is not. And you can only hear it from inside the car, it sounds like the noise is coming from below the dash.

And...


Has anyone else had a problem with there seat belt not retracting???
Any way i can fix this?- short of replacing the whole unit.



thanks
Reply
Old Mar 2, 2005 | 08:59 AM
  #2  
elnido's Avatar
Registered User
 
Joined: Jan 2005
Posts: 176
Likes: 0
From: Boulder, CO
http://www.4x4wire.com/toyota/minutemods/seatbelt/
My seatbelts don't retract either. I haven't tried this yet, let me know if its easy.
Reply
Old Mar 2, 2005 | 09:04 AM
  #3  
elnido's Avatar
Registered User
 
Joined: Jan 2005
Posts: 176
Likes: 0
From: Boulder, CO
http://www.4x4wire.com/toyota/minutemods/seatbelt/
my seat belts won't retract either. Let me know if this is easy, haven't tried it yet.
Reply
Old Mar 2, 2005 | 09:17 AM
  #4  
Tato97T100's Avatar
Thread Starter
Registered User
 
Joined: Feb 2005
Posts: 85
Likes: 0
From: I live in So. California
will probobly try it tonight, and will let you know.

thanks a lot

is this specifically for T100's? or just seat belts in general?
Reply
Old Mar 2, 2005 | 09:09 PM
  #5  
Tato97T100's Avatar
Thread Starter
Registered User
 
Joined: Feb 2005
Posts: 85
Likes: 0
From: I live in So. California
Ok Elnido, i went to work on my seatbelts about 2 hours ago. Unfortunately my spring was broken, and couldn't just be wound back up. But thats ok, at least i dont have to replace the whole unit, just the spring.

But heres some advice, dont pull off the whole panel, we all know it isn't fun, and dont do it unless you are planning on changeing the speakers, and putting some sound deading products in there. Just loosen it enough to pull the unit out.

It takes about 10 minutes to get the whole unit out and wind the seat belt-which takes a lot of winds-but make sure to watch it and leave maybe one ring around...just to be safe

If you have the time, i would also take the entire seat belt out and wash it in the ol' washing machine, make it nice.

But tightening that spring sure does work nicely, and if you're lucky and it isn't shot like my passenger side was, the whole process should take you only 15-20 min if youv'e been around the area before, maybe an hour if you haven't.

But if you do decide to pull the whole panel off, like i said- make it worth your while.



Thank you so much for your link, i would've ended up buying the whole unit, but this was much easier. Good looking out!

Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
4Xtruck
95.5-2004 Tacomas & 96-2002 4Runners
16
Sep 24, 2015 09:38 AM
PBRaddict#1
Newbie Tech Section
3
Sep 22, 2015 07:50 AM
Bill854x4
86-95 Trucks & 4Runners
1
Sep 20, 2015 04:32 PM
Anthony Lee Mathis
86-95 Trucks & 4Runners
1
Sep 15, 2015 07:22 AM
ac7822
84-85 Trucks & 4Runners
2
Sep 11, 2015 08:49 AM


Thread Tools
Search this Thread

All times are GMT -8. The time now is 02:44 AM.