99+ Tundra, 00+ Sequoia, 98+ Land Cruiser/LX470 Late model full size trucks and SUVs

Spacers/Wheeler coils

Thread Tools
 
Search this Thread
 
Old Sep 7, 2004 | 02:09 PM
  #1  
Robinhood150's Avatar
Thread Starter
Contributing Member
 
Joined: May 2002
Posts: 6,033
Likes: 3
From: Wandering around Phoenix
Spacers/Wheeler coils

I know this info can be found at TS, but in the interest of helping this board grow...

1. When the wheeler coils or any "in pack" spacers are used, are the stock shocks swapped out for longer ones? Does it make a difference whether it's the TRD shocks or not?

2. How do you guys like the wheeler coils?

3. How do you guys like spacers?

4. Any other modifications needed when just going with a leveling lift, like diff drop, UCA swap, etc? I take it that the diff drops are just simple spacers like for the 3rd gen 4runners and tacomas that drop the diff an inch or two for better CV angles.
Reply
Old Sep 8, 2004 | 08:11 AM
  #2  
Robinhood150's Avatar
Thread Starter
Contributing Member
 
Joined: May 2002
Posts: 6,033
Likes: 3
From: Wandering around Phoenix
Ah come on, somebody here's got to know and wants to contribute to the YT tech.
Reply
Old Sep 15, 2004 | 07:04 PM
  #3  
mike.elmes's Avatar
Registered User
 
Joined: Sep 2004
Posts: 3
Likes: 0
From: Edmonton, Canada
Coil spacers

Hello all,
I have put several thousand miles on mine(cornfed 2.5 inch) and love them. They are best done with 10 or 11inch Limit Straps, so that the shocks dont over extend on good sized speedbumps or potholes.

Nice forum guys

I also added add a leafs to the rear leafpack to get level.

Last edited by mike.elmes; Sep 15, 2004 at 07:06 PM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MadMax48
86-95 Trucks & 4Runners
16
Mar 3, 2020 10:33 AM
the_supernerd
86-95 Trucks & 4Runners
13
Oct 1, 2015 09:20 PM
mojo4x420
95.5-2004 Tacomas & 96-2002 4Runners
0
Sep 16, 2015 08:07 AM




All times are GMT -8. The time now is 12:58 AM.