Tacoma Rear Bumper with built in Class 3 Hitch!
Jun 10, 2010 | 10:00 AM
#1
Thread Starter
Registered User
Joined: Aug 2006
Posts: 415
Likes: 0
From: Platteville, WI
Tacoma Rear Bumper with built in Class 3 Hitch!
4x Innovations now has Tacoma Rear Hitch bumpers that are rated as a class 3 hitch! Our engineering team spent 4 months designing, analyzing, and performing destructive testing on this awesome new design! This new rear bumper features the same great 1/2" high grade steel mounting plates that have built in recovery shackle mounting points as all of our other bumpers. We then added a 2" receiver tube and all of the required supports to create the strongest hitch available for your Tacoma. Also new is the full width top tube allowing the entire length of the bumper to act as a step for getting to things in the bed with out dropping the tailgate.
The integrated 2" receiver hitch has been designed and tested to well exceed the SAE standards for a class 3 receiver hitch. To prove the ultimate strength of this beautiful piece of work additional testing was performed. After taking this bumper to 26500 lbs of pull force with a simultaneously applied 10000 lb tongue load there was less than 1 degree of deflection!
Order your new hitch and bumper all in one great item today for just $473. See the 4x Innovations website here for more information.
Here's some photos:
The integrated 2" receiver hitch has been designed and tested to well exceed the SAE standards for a class 3 receiver hitch. To prove the ultimate strength of this beautiful piece of work additional testing was performed. After taking this bumper to 26500 lbs of pull force with a simultaneously applied 10000 lb tongue load there was less than 1 degree of deflection!
Order your new hitch and bumper all in one great item today for just $473. See the 4x Innovations website here for more information.
Here's some photos:
Last edited by traxman25; Jun 2, 2016 at 12:20 PM.
Trending Topics
Dec 21, 2010 | 08:10 AM
#9
Thread Starter
Registered User
Joined: Aug 2006
Posts: 415
Likes: 0
From: Platteville, WI
For this thread yes. I will have them very soon for the 84-89 4 Runner, a 90-95 4 Runner is in the shop getting the first prototype done this week, and an 89-95 Pickup is buried in the snow bank outside waiting. 
