95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section) Post your build-ups here

gornish_hick's 99 Black Stallion 4Runner Build

Thread Tools
 
Search this Thread
 
Old Jun 6, 2012 | 01:19 PM
  #1  
gornish_hick's Avatar
Thread Starter
Registered User
 
Joined: Jan 2009
Posts: 80
Likes: 0
From: Fredericton, NB, Canada
gornish_hick's 99 Black Stallion 4Runner Build

Hey everyone
Thought with all the that I've put into my 99 runner over the past year Id start this thread too keep track of everything for myself and share it with everyone else (feel free too leave a comment). My love for the 4runner started in 2008 with the purchase of my first ever runner (my 1996 2.7L SR5). After a few years, age and miles took its toll on the old 96 and I decided to upgrade. In April 2011 I finally came across a Black 1999 SR5 manual 4Runner, it was love at first sight.
Here is a few pics of it when I first brought it home sitting beside my 96




I managed to not spend a penny on it until December 2011 when I had a little fight with a light pole on a snowy sad day. damage was heartbreaking and bad enough. I got some quotes to have it repaired from a few local auto body shops but with a price like $2500-3500 I decided to do it myself.
Before

After


In march I came across a set of Fabtech adjustable coilovers 0-3.5" for a good price and decided then that my runner needed to go bigger. I purchased a set of OME 906's for the rear. With a few days to spare I went at it and started to put it together




With the 906's restricting me from going more than 2" in the front I decided to buy 1.5" coil spacers for the rear. Installed them and adjusted the front up to 3" now after everything had settled it sits at 38" from ground to the top of the wheel-well all around.


I had a nasty rust hole in my rocker panel so a couple weeks ago I went at it and patched it up


Since I had to remove the running boards to do the body work I decided to keep them off, which suprised the woman when she came out to try to jump in it with a skirt on
I decided too keep them off



This past weekend i replaced brake pads installed 1.25" wheel spacers and installed a 1" front diff drop.
So right now here i sit waiting on my tires to be available to me (285/75/16 DC fun country II)

Last edited by gornish_hick; Jun 6, 2012 at 01:36 PM.
Reply
Old Jun 6, 2012 | 10:09 PM
  #2  
nutsbrett's Avatar
Registered User
 
Joined: Feb 2012
Posts: 31
Likes: 0
From: Paso Robles California
I like the look of it without the running boards! Needs some bigger tires now!
Reply
Old Jun 7, 2012 | 10:04 AM
  #3  
gornish_hick's Avatar
Thread Starter
Registered User
 
Joined: Jan 2009
Posts: 80
Likes: 0
From: Fredericton, NB, Canada
I agree they will not be going back on.
Im counting down the days on the tires (285/75/16 DC Fun Country II's) 2 weeks and they should be ready. Its like waiting for Christmas when I was 10!
Reply
Old Jun 7, 2012 | 03:04 PM
  #4  
nutsbrett's Avatar
Registered User
 
Joined: Feb 2012
Posts: 31
Likes: 0
From: Paso Robles California
Nice! and swapping rims to different ones i assume?
Reply
Old Jun 7, 2012 | 04:31 PM
  #5  
gornish_hick's Avatar
Thread Starter
Registered User
 
Joined: Jan 2009
Posts: 80
Likes: 0
From: Fredericton, NB, Canada
Yes hopefully by the end of the year. For now stock rims with 1.25" wheel spacers. I got a price on these pro comp rims that are affordable to me and I like the looks of them. what do you think?
http://www.procompusa.com/prodDetail...0073&plID=3626

Last edited by gornish_hick; Jun 7, 2012 at 04:39 PM.
Reply
Old Jun 7, 2012 | 05:12 PM
  #6  
gornish_hick's Avatar
Thread Starter
Registered User
 
Joined: Jan 2009
Posts: 80
Likes: 0
From: Fredericton, NB, Canada
Added a set of 1.25" wheel spacers last Sunday just got a pic of it now today
Reply
Old Jun 7, 2012 | 09:01 PM
  #7  
nutsbrett's Avatar
Registered User
 
Joined: Feb 2012
Posts: 31
Likes: 0
From: Paso Robles California
Spacers look good!
And i busted some photoshop skills cause i felt like wasting some time! and the rims look like they would be sweet lookin!

Reply
Old Jun 8, 2012 | 08:48 AM
  #8  
gornish_hick's Avatar
Thread Starter
Registered User
 
Joined: Jan 2009
Posts: 80
Likes: 0
From: Fredericton, NB, Canada
Thats awesome thanks! I agree with you 100% seeing that, I may have to start saving my pennies even sooner!
Reply
Old Jun 10, 2012 | 05:07 PM
  #9  
gornish_hick's Avatar
Thread Starter
Registered User
 
Joined: Jan 2009
Posts: 80
Likes: 0
From: Fredericton, NB, Canada
picked up a U joint and Moog rear swaybar link friday and replaced them that night. I was in a rush to go fishing for the rest of the weekend so I never got any pics. but heres a few pics of the weekend trip




Reply
Old Jun 12, 2012 | 08:36 PM
  #10  
nutsbrett's Avatar
Registered User
 
Joined: Feb 2012
Posts: 31
Likes: 0
From: Paso Robles California
Looks like a blast!! to bad the river by my house is just sinking sand when it flows :/
Reply
Old Jun 14, 2012 | 05:35 PM
  #11  
gornish_hick's Avatar
Thread Starter
Registered User
 
Joined: Jan 2009
Posts: 80
Likes: 0
From: Fredericton, NB, Canada
great fun! one thing i love about where I'm from is the beautiful rivers. That sucks, be fun if it was mud other than sand!
Reply
Old Jun 18, 2012 | 01:42 PM
  #12  
gornish_hick's Avatar
Thread Starter
Registered User
 
Joined: Jan 2009
Posts: 80
Likes: 0
From: Fredericton, NB, Canada
Me and a buddy of mine decided to pack up Saturday and take our runners for a trip to one of our favorite camping spots. Thought id share some pics of the trip

Stop to cut the trail out


set up camp



A good end to an awesome day
Reply
Old Jun 18, 2012 | 09:11 PM
  #13  
nutsbrett's Avatar
Registered User
 
Joined: Feb 2012
Posts: 31
Likes: 0
From: Paso Robles California
Dang im jealous of your location up there! Down here in California where i live its either dunes which is no fun for wheeling and camping, or where i am located to get any decent trails i'd have to drive 2-3 hours! Lovin the 4Runner! My tuck is becoming more and more a 4Runner wannabe
Reply
Old Jun 19, 2012 | 04:43 PM
  #14  
gornish_hick's Avatar
Thread Starter
Registered User
 
Joined: Jan 2009
Posts: 80
Likes: 0
From: Fredericton, NB, Canada
Thanks bud, that's one thing I'm grateful about where I'm from is how beautiful it is, yet a lot of people around here never get out too see most of it. sounds like you might just have too convert from Taco to Runner
Reply
Old Jun 19, 2012 | 08:10 PM
  #15  
nutsbrett's Avatar
Registered User
 
Joined: Feb 2012
Posts: 31
Likes: 0
From: Paso Robles California
Eeeeeeww Runners nah i like runners and all, my freind and i are doing a build on his right now accually! i have the thread in my sig, but i am more of the crawlin and campin type guy like you i am assuming, but for the dunes and what not i got a dirbike
Reply
Old Jun 28, 2012 | 04:03 PM
  #16  
gornish_hick's Avatar
Thread Starter
Registered User
 
Joined: Jan 2009
Posts: 80
Likes: 0
From: Fredericton, NB, Canada
Well I have been slacking lately, not much has got done around here. Me and my son to a look at my front tire today and came too the conclusion i need an alignment, and need my new tires on ASAP
Reply
Old Jul 24, 2012 | 06:04 PM
  #17  
gornish_hick's Avatar
Thread Starter
Registered User
 
Joined: Jan 2009
Posts: 80
Likes: 0
From: Fredericton, NB, Canada
Decided too replace Both CV axles on the weekend since both had torn inner boots. I referred to this write up that helped A LOT http://www.4x4wire.com/toyota/maintenance/cv_axle/
Overall it was an easy replacement (never swore once!)
Reply
Old Jul 28, 2012 | 04:20 AM
  #18  
gornish_hick's Avatar
Thread Starter
Registered User
 
Joined: Jan 2009
Posts: 80
Likes: 0
From: Fredericton, NB, Canada
Got a set of 285/75/16 DC Fun Country II's installed Yesterday.
Reply
Old Aug 3, 2012 | 10:27 AM
  #19  
gornish_hick's Avatar
Thread Starter
Registered User
 
Joined: Jan 2009
Posts: 80
Likes: 0
From: Fredericton, NB, Canada
Thought I would add another Pic with the new shoes on
Reply
Old Sep 3, 2012 | 05:24 PM
  #20  
gornish_hick's Avatar
Thread Starter
Registered User
 
Joined: Jan 2009
Posts: 80
Likes: 0
From: Fredericton, NB, Canada
Been a while, I figure Id update before I forgot. Since my last update I had a little issue with my 4wd not engaging. I checked the vacuum in both lines going too the actuator and both have good vacuum. Therefore I got it narrowed down to the actuator gone bad. so this week when I get a chance Im going to pick one up and replace it and see if it cures the problem.
Ive also been on the battle cleaning up all the rust on my runner (not saying there is a lot, but there is some).


Meanwhile heres a few shot I took a week or 2 ago for fun.









Last edited by gornish_hick; Sep 3, 2012 at 05:25 PM.
Reply



All times are GMT -8. The time now is 01:56 AM.