Someone here mounted front fog lamps in their TJM or ARB ?

Thanks

David

 

BruceTS did this. He put some Hummer H3 fogs into his T15 which was already mod'd pretty heavily.

Turned out great.

 

I think someone else did as well. I did check Bruce's pics site

I am thinking of mounting some flush mount Hella's in the turn signal slots and going to an LED turn signal.

Driving to the ski resort we get the worse fog you can imagine.

Other option would be to mount some small ones behind the lower slots but in my experience, small fog lamps are just that, small lamps and big ones (at least a 4 or 5" round ones of 3 x 5 rectangular) are tough to get in.

David

 

David,

Luckily for you, i have these links as bookmarks Here's the thread:
https://www.yotatech.com/forums/show...t=turn+signals

I think youi might be thinking of me as the 2nd person. i have not gotten around to this mod yet, but plan to using these non-sequential led turn signals:

http://www.vehiclelight.com/6054a.html

Here's the info on the new LED resistor:
https://www.yotatech.com/forums/f2/cheap-bastards-idiot-guide-fixing-fast-blinkers-after-led-swap-80626/

Bob

 

I think you are talking about Jacksopt.

 

I did this: https://www.yotatech.com/forums/show...&highlight=arb

 

One of the reasons why I went with the oval turn indicators, it gave the room needed to fit the 3" fogs, but there is enough to fit 4" round one's as well. They put out plenty of light and on the trails at night, I usually keep my mains lights off and only the fogs on, so as not to blind the person in front of me.

here's a few pictures

 

Those fogs look good BruceTS!

I know the ARB Sahara comes w/ cutouts to allow you stick fogs in w/ cutting the bumper.