I have recently read that lifting the front end of a 3rd gen 4runner over 2" will create highway vibrations from extreme CV joint angles. Yet it seems that most people have lifted atleast 2.5" up to 3 inches either with 3" spacers, or stacking 1/2" spacers on the tundra setup. This has got me second guessing lifting arrangments. I would like some feedback on new vibrations if any, that have arrived since a 2.5 or 3" front lift on your 4-runners.

Thanks in advance
Greg

 

I have 6" of lift and have no CV vibrations!

Nah, but when I had a coil/spacer lift I had some vibrations but, it was due to the fact I was running 881's and 2.5" spacers.

 

i think you lower the diff. to eliminate that problem... but i may be wrong

Matt

 

the driveshaft will cause vibrations if you are 2WD.