V lutch
Jul 25, 2016 | 09:35 AM
#1
Thread Starter
Registered User
Joined: Sep 2012
Posts: 77
Likes: 0
Clutch
Just. Wondering. Has anyone replaced a clutch anytime lately. On a 02 4cylinder. I was wondering your personal thoughts. Thanks
Last edited by 40vern; Jul 26, 2016 at 07:43 AM. Reason: Spelling
Jul 25, 2016 | 11:58 PM
#2
Registered User
iTrader: (1)
Joined: Apr 2009
Posts: 13,381
Likes: 100
From: I live in New Tripoli Pa out in the woods
Just how do you use the truck ??
Lots of driving where the clutch gets used hard ??
Then maybe just average driving .
You can`t go wrong with the Aisin Clutch
Need heavy duty my pick would be a Marlin Crawler1,200 pound clutch kit
If your changing the clutch change the hydraulics as well.
Happy clutching !!
Lots of driving where the clutch gets used hard ??
Then maybe just average driving .
You can`t go wrong with the Aisin Clutch
Need heavy duty my pick would be a Marlin Crawler1,200 pound clutch kit
If your changing the clutch change the hydraulics as well.
Happy clutching !!
Jul 26, 2016 | 12:31 AM
#3
Thread Starter
Registered User
Joined: Sep 2012
Posts: 77
Likes: 0
throwout bearing
I think my clutch is ok. Throwout bearing is bad
Just how do you use the truck ??
Lots of driving where the clutch gets used hard ??
Then maybe just average driving .
You can`t go wrong with the Aisin Clutch
I think my throwout bearing is bad
I think my throwout bearing is bad
I think the clutck is fine. The throwout bearing is making allot of noise
Need heavy duty my pick would be a Marlin Crawler1,200 pound clutch kit
If your changing the clutch change the hydraulics as well.
Happy clutching !!
Lots of driving where the clutch gets used hard ??
Then maybe just average driving .
You can`t go wrong with the Aisin Clutch
I think my throwout bearing is bad
I think my throwout bearing is bad
I think the clutck is fine. The throwout bearing is making allot of noise
Need heavy duty my pick would be a Marlin Crawler1,200 pound clutch kit
If your changing the clutch change the hydraulics as well.
Happy clutching !!
Jul 26, 2016 | 11:14 AM
#4
Registered User
iTrader: (1)
Joined: Apr 2009
Posts: 13,381
Likes: 100
From: I live in New Tripoli Pa out in the woods
My rule if the transmission comes out New Clutch always goes in if I have no History .
If your going to all that work for a clutch release bearing more power to you .
If your going to all that work for a clutch release bearing more power to you .
Jul 26, 2016 | 04:06 PM
#6
Thread Starter
Registered User
Joined: Sep 2012
Posts: 77
Likes: 0
Well got everything out but the little pilot bearing will try and get tnat out in the morning. Oh yes. Just cause I from alabama don't mean I am that slow lol. After 3 hour of getting this out yoj bet a new clutch is going in lol. May not be the most expensive but I will replace everything
Thread
Thread Starter
Forum
Replies
Last Post
norcal98
86-95 Trucks & 4Runners
5
Jul 21, 2016 12:31 PM
My'lil'truck
Newbie Tech Section
3
Jul 14, 2016 11:02 AM
