YotaTech Forums

95.5-2004 Tacomas & 96-2002 4Runners 4th gen pickups and 3rd gen 4Runners

tundra coils

   
Old Feb 14, 2005 | 07:36 PM
  #41  
Localmotion's Avatar
Localmotion
Thread Starter
Banned
 
Joined: Mar 2004
Posts: 0
Likes: 0
Originally Posted by ugadawg95
Cool, let me know what you think. I put the TRD Coils/N91S with the 891/N86 on last weekend. I am going to get an alignment tomorrow. The ride is sooooo much better! I do have a driveline vibration when I let off of the gas around 55-45 mph. I am hoping the Panhard bracket takes care of it If not I gotta do some detective work. It only happened after the rear gear was installed. I verified this by accident. I put the rear coils/shocks on and had to run to the store. That is when I first noticed it. Hopefully it is something simple...Good luck!
yea like an idiot i forgot to order the bracket...but i asked SS3 to put me on the next production list...which is this wed.

matt
Reply
0
Old Feb 15, 2005 | 02:22 PM
  #42  
Localmotion's Avatar
Localmotion
Thread Starter
Banned
 
Joined: Mar 2004
Posts: 0
Likes: 0
just out of curiosity...which is left and right. Is the left the yellow and blue one and the right the all yellow one?

matt
Reply
0
Old Feb 15, 2005 | 04:22 PM
  #43  
ugadawg95's Avatar
ugadawg95
Contributing Member
 
Joined: Jun 2003
Posts: 1,067
Likes: 0
From: Bethlehem, GA
YY on drivers side, YB on passenger side...
Reply
0
Old Feb 15, 2005 | 04:24 PM
  #44  
ricqik's Avatar
ricqik
Registered User
 
Joined: Dec 2004
Posts: 59
Likes: 0
From: St. Paul, MN
yellow/yellow is driver, yellow/blue is passenger.

ya beat me to it.
Reply
0
Old Feb 15, 2005 | 04:31 PM
  #45  
Localmotion's Avatar
Localmotion
Thread Starter
Banned
 
Joined: Mar 2004
Posts: 0
Likes: 0
Originally Posted by ricqik
yellow/yellow is driver, yellow/blue is passenger.

ya beat me to it.
sweet thanks guys
Reply
0
Old Feb 22, 2005 | 04:50 PM
  #46  
Localmotion's Avatar
Localmotion
Thread Starter
Banned
 
Joined: Mar 2004
Posts: 0
Likes: 0
i got my coils installed with the help(he did most of the work) of Filtyhrich. This ride is absolutley awesome. I just needed to throw my top plate spacer on, with my pan hard drop and it will be complete. I am extremely satisfied with it. After looking at Filthy's rig, im thinkin about a 1in body lift thanks for the help guys!

Matt
Reply
0
Old Feb 22, 2005 | 04:53 PM
  #47  
GodwinAustin's Avatar
GodwinAustin
Contributing Member
 
Joined: Oct 2004
Posts: 1,263
Likes: 0
From: JACKSON
Originally Posted by Localmotion
i got my coils installed with the help(he did most of the work) of Filtyhrich. This ride is absolutley awesome. I just needed to throw my top plate spacer on, with my pan hard drop and it will be complete. I am extremely satisfied with it. After looking at Filthy's rig, im thinkin about a 1in body lift thanks for the help guys!

Matt

SWEET! pics when you have 'em Matt
Reply
0
Old Feb 22, 2005 | 04:59 PM
  #48  
Localmotion's Avatar
Localmotion
Thread Starter
Banned
 
Joined: Mar 2004
Posts: 0
Likes: 0
Originally Posted by GodwinAustin
SWEET! pics when you have 'em Matt
sure thing....i lost my camera battery charger... so im gonna buy another one tmw..

matt
Reply
0
Old Feb 22, 2005 | 05:15 PM
  #49  
WT's Avatar
WT
Registered User
 
Joined: Apr 2003
Posts: 721
Likes: 1
From: Virgina
Originally Posted by Localmotion
i got my coils installed with the help(he did most of the work) of Filtyhrich. This ride is absolutley awesome. I just needed to throw my top plate spacer on, with my pan hard drop and it will be complete. I am extremely satisfied with it. After looking at Filthy's rig, im thinkin about a 1in body lift thanks for the help guys!

Matt
Yeah I was able to take it out for a ride after helping Matt install his gauges and I will have to say dang... my revtek front setup will have to go soon and I will have to order up a set of these spings this year as my next change.
Reply
0
Old Feb 23, 2005 | 07:37 AM
  #50  
scott's Avatar
scott
Registered User
 
Joined: Jul 2002
Posts: 30
Likes: 0
From: Raleigh, NC
What's the advantage of running the Tundra coils up front vs. the OME coils?
Reply
0
Old Feb 23, 2005 | 07:42 AM
  #51  
Localmotion's Avatar
Localmotion
Thread Starter
Banned
 
Joined: Mar 2004
Posts: 0
Likes: 0
Originally Posted by scott
What's the advantage of running the Tundra coils up front vs. the OME coils?
I absolutely love the tundra set up. its comfortable as well as good looking. I ran the 881s with bilsteins and they were the most harsh ride ever. read andys thread about the tundra set up...i believe he goes into detail about the advantages.

matt
Reply
0
Old Feb 23, 2005 | 07:54 AM
  #52  
scott's Avatar
scott
Registered User
 
Joined: Jul 2002
Posts: 30
Likes: 0
From: Raleigh, NC
Cool, thanks!
Reply
0
Old Feb 23, 2005 | 10:15 AM
  #53  
snwbrdpunk16's Avatar
snwbrdpunk16
Registered User
 
Joined: May 2004
Posts: 352
Likes: 0
From: Everett, Wa
I run the OME 881's with Rancho RS5000's and love them. Very comfy, no complaints.
Reply
0
Old Feb 23, 2005 | 10:34 AM
  #54  
Localmotion's Avatar
Localmotion
Thread Starter
Banned
 
Joined: Mar 2004
Posts: 0
Likes: 0
austin...here are some old and new pics.

OME 881s and 906s w/bilsteins


THE TUNDRA lift is w/o the top out spacers





matt
Reply
0
Old Feb 23, 2005 | 12:55 PM
  #55  
AznSky's Avatar
AznSky
Registered User
 
Joined: Mar 2003
Posts: 2,785
Likes: 0
From: Ann Arbor, MI
hey do you think you could take a picture of the lower cup of your strut assembly? I want to make sure I know what it means when ppl say you need to put the cup facing down.

Thanks
Reply
0
Old Feb 23, 2005 | 12:57 PM
  #56  
Localmotion's Avatar
Localmotion
Thread Starter
Banned
 
Joined: Mar 2004
Posts: 0
Likes: 0
Originally Posted by AznSky
hey do you think you could take a picture of the lower cup of your strut assembly? I want to make sure I know what it means when ppl say you need to put the cup facing down.

Thanks
the cup is supposed to be facing down???? uhh oh...lemme check if i did that

matt
Reply
0
Old Feb 23, 2005 | 12:58 PM
  #57  
FilthyRich's Avatar
FilthyRich
Contributing Member
 
Joined: Jun 2004
Posts: 4,218
Likes: 0
From: Richmond, Va
Looking good!!

p.s. tool box fixed. Keys found. Tragedy averted.
Reply
0
Old Feb 23, 2005 | 01:03 PM
  #58  
AznSky's Avatar
AznSky
Registered User
 
Joined: Mar 2003
Posts: 2,785
Likes: 0
From: Ann Arbor, MI
err....sorry i read the other thread wrong, i think the cup is supposed to face up. hehe.....
Reply
0
Old Feb 23, 2005 | 01:05 PM
  #59  
Localmotion's Avatar
Localmotion
Thread Starter
Banned
 
Joined: Mar 2004
Posts: 0
Likes: 0
Originally Posted by AznSky
err....sorry i read the other thread wrong, i think the cup is supposed to face up. hehe.....
phewww
Reply
0
Old Feb 23, 2005 | 01:06 PM
  #60  
Localmotion's Avatar
Localmotion
Thread Starter
Banned
 
Joined: Mar 2004
Posts: 0
Likes: 0
Originally Posted by FilthyRich
Looking good!!

p.s. tool box fixed. Keys found. Tragedy averted.
tool box fixed? Great to hear that man. I was feeling reallly bad about that. Im glad you found your keys...where were those damn things? thanks a lot for the install again!

matt
Reply
0

Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

All times are GMT -8. The time now is 02:43 PM.