torsion lift
May 3, 2003 | 07:06 PM
#1
Thread Starter
Contributing Member
Joined: May 2003
Posts: 300
Likes: 0
From: Oklahoma city
torsion lift
A person that I know said that I could get some lift out of my 88'4runner by doing a torsion lift on the front and then an add-a-leaf on the back.
Anybody confirm or deny such a thing. I am not wanting a huge lift, just a couple of inches.
Thanks
Anybody confirm or deny such a thing. I am not wanting a huge lift, just a couple of inches.
Thanks
May 3, 2003 | 07:54 PM
#4
Registered User
Joined: Jul 2002
Posts: 977
Likes: 0
From: Thurston County WA State
Don't over do it on the torsion bar crank. I learned that the hard way and ended up having to replace both upper/lower ball joints, as well as the pitman arm and idler arm! See I have 1.5" lift shackles and an add a leaf, and I wanted the truck more "level" and boy did it cost!
May 3, 2003 | 07:55 PM
#5
Contributing Member
Joined: May 2002
Posts: 2,068
Likes: 0
From: Atlanta, GA
search the forum, tons of info.
heres a start... http://www.off-road.com/toyota/tech/torsion/index.htm
heres a start... http://www.off-road.com/toyota/tech/torsion/index.htm
Thread
Thread Starter
Forum
Replies
Last Post
1uzRunner
84-85 Trucks & 4Runners (Build-Up Section)
63
Nov 10, 2018 03:58 PM
choppe777
Axles - Suspensions - Tires - Wheels
5
May 16, 2016 08:00 AM
FS[PacNorWest]: 1993 4 Runner, V6, 4wd, Auto,
AkitaDog
Vehicles - Trailers (Complete)
0
Sep 3, 2015 09:01 PM
