So I found my self with just a few hours to kill, so i decided to do this! so after tearing into it i got hung up with the long bolt on the driver side, i could not slide the bolt all the way out! i did some research and found this and thought it could help some people out,deff read this before tearing into it!!!
http://forum.ih8mud.com/95-gen-toyot...placement.html
But i came into a prob that was not on this right up. That long bolt on the driver side hit my diff and could not even get it half way out. so what i did was cut the coller down on on side till the head and hit it hard with the hammer and it forced it over the rib and that gave me enough room to get this job done, but getting it back in was a real pain, it took a lot of persuasion!

 

P.S. sorry i did not take any pictures i only had a short amount of time to get this done!