Share your poseur pics!
#26
Originally Posted by mt_goat
Very nice pics Bruce. Have you had any problems with your CVs? That has got to be the best flexing IFS rig I've seen. Are your CV's Total Chaos too?
#27
Originally Posted by BruceTS
I use modified Tundra axles and I don't normally have any problems with my CV's. I did break one going up Sledgehammer trail, but that could have easily been avoided, I just wanted to know how much stress my drivetrain could handle.
#28
#32
Originally Posted by mt_goat
Cool, modified in what way?
Upper right corner is a stock Tundra inner CV
Lower right corner is a damaged stock CV shroud damaged due to the axle angle was greater than it could handle. This was a spare that I had carried, then needed to use, but the long travel was too much and shredded the boot before I got back to camp.
Lower left is a modified CV, the sheetmetal shroud removed
http://www.tundrasolutions.com/photo...draxle-med.jpg
This shows the stock & modified Tundra axles at full flex. This is needed when you install the Total Chaos Long Travel kit.
http://www.tundrasolutions.com/photo...raxleM-med.jpg
Last edited by BruceTS; Sep 27, 2004 at 06:41 PM.
#39
Those are some cool pictures! I don't have too many of my truck posing, but this one from last summer is my favorite one. It was taken on the 119 trail at Evans Creek ORV park near Mt Rainier in WA. I am usually the leader on the trail so there are not too many pictures of my truck in action. I am out at sea so there are no really recent pic of my truck
http://community.webshots.com/photo/...84007336eeixlZ
http://community.webshots.com/photo/...84007336eeixlZ









