95.5-2004 Tacomas & 96-2002 4Runners 4th gen pickups and 3rd gen 4Runners

Sell it as is or in stock form?

Old Feb 23, 2005 | 09:58 PM
  #1  
wvuviv30's Avatar
Thread Starter
Registered User
 
Joined: May 2004
Posts: 336
Likes: 0
From: Lusby, MD
Sell it as is or in stock form?

I have a 94 4Runner... SR5, Fully loaded, ~140K miles. Nothing is wrong it it. Motor runs smooth, burns a little bit of oil probably about .5-1 qt for every 5000 miles now (had a problem with the PCV, but fixed now)

Mods:
- K&N FIPK, (have orginal parts)
- BJ Spacers, (alignment $50)
- OME Shocks (will stay on)
- OME Coils (have stocks)
- Manual Locking Hubs (need the ADD piece)
- 33x10.50R15 BFG MT KM (I can get a set of 31x10.50R15 BFG AT KO for $200, $40 to get swaped, I will NOT sell the 33s if I am putting back to stock).

Right now I am selling it for $7500.
But the Blue Book value is at $6500-6800.

So what should I do, put it back to stock condition or sell it with the mods?
I am going to sell the mods for about 75-80% of the orginial price (every thing it was new as of July 04).
Reply
Old Feb 23, 2005 | 10:00 PM
  #2  
Tacoma Dude's Avatar
Contributing Member
 
Joined: Mar 2003
Posts: 8,345
Likes: 0
From: Orange County, CA
Getting it back to stock greatly widens your customer base.
Leaving it as it is will attract a smaller demographic.
Reply
Old Feb 23, 2005 | 10:39 PM
  #3  
bike4miles's Avatar
Contributing Member
 
Joined: May 2004
Posts: 3,400
Likes: 0
From: Tucson, AZ
Drop it to stock hight and throw on the small tires. Lifted trucks, even really nice ones are much harder to sell. My friend had a hell of a time unloading his sweet 95' 4runner because it was lifted 4" on 32s and everyone kept telling him it wasn too extreme for what they were going to use it for. The added get-up-and-go from the small tires also helps.
Reply
Old Feb 23, 2005 | 11:00 PM
  #4  
epic37311's Avatar
Contributing Member
 
Joined: Oct 2004
Posts: 969
Likes: 0
From: Decatur TN
Yea and I get some people wonder about the wear and tear on one thats been lifted. Like offroading and what not.
Reply
Old Feb 24, 2005 | 07:28 AM
  #5  
roger's Avatar
Registered User
 
Joined: Jun 2004
Posts: 483
Likes: 0
From: Austin, TX
Remember that the average (i.e. non-enthusiast) buyer won't be willing to pay a premium for all the goodies you put on there. Like Peter said, that will reduce your customer base.

I'd say return it to stock (or as close to stock as you can get it) and then sell the other parts separately. You'll probably get more money that way.
Reply
Old Feb 24, 2005 | 12:41 PM
  #6  
Racer944's Avatar
Registered User
 
Joined: Jan 2005
Posts: 905
Likes: 0
From: Birmingham, AL WAR EAGLE
Take that stuff off and sell me the BJ spacers. Plus you'll just got more money parting it out, simple as that.
Reply
Old Feb 24, 2005 | 12:50 PM
  #7  
wvuviv30's Avatar
Thread Starter
Registered User
 
Joined: May 2004
Posts: 336
Likes: 0
From: Lusby, MD
I have had some people PM me about the stuff I am going to take off. I have to see what happens in 2 weeks.

Then I might put the parts on E-bay because several people want them, and thats the easiest way to do it. plus with e-bay I can have a buy it now option.
Reply
Old Feb 24, 2005 | 03:40 PM
  #8  
Flygtenstein's Avatar
Registered User
 
Joined: Sep 2002
Posts: 4,216
Likes: 1
From: Fort Collins, CO
Those mods are really not worth getting it that far above Blue Book.

Those mods are likely easier to leave on and not mess with than to take off and try to sell. If you think of yourself as costing a dolllar and hour to take that off, I would not mess with it.
Reply
Old Feb 24, 2005 | 08:55 PM
  #9  
wvuviv30's Avatar
Thread Starter
Registered User
 
Joined: May 2004
Posts: 336
Likes: 0
From: Lusby, MD
I have the time on my hands. I am planning on doing it during Spring Break.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
Jun 1, 2021 01:51 PM
GreatLakesGuy
The Classifieds GraveYard
8
Sep 4, 2015 09:27 AM
Gone Fission
86-95 Trucks & 4Runners
6
Jul 31, 2015 03:58 AM
Athansinis
Hot Deals - Free Stuff - Craigslist
0
Jul 27, 2015 08:38 AM
mluz013
Newbie Tech Section
1
Jul 24, 2015 12:31 PM


Thread Tools
Search this Thread

All times are GMT -8. The time now is 07:49 AM.