I think I have been told this but forgot, how does ppl with SAWs adjust to level? What I mean is how do ppl know when its level, I think I was told to measure from the ground (or center of your rim) to the bottom of the fender... I think my SAWs need adjusted...

 

measure from top of the wheel to the bottom of the fender with all 4 tires on level ground

 

just remember to jack the front end up before you start turning on the adjuster nut or you may rip the poly bushings at the top of the springs like I did.

measure-jackup-adjust-drop-measure - repeat if necessary.

 

Like keisur said. Thats what you have to do. It's a pain in the , but at least you'll be level