Newb's reflection after 2 months of ownership*LONG w/ lots of Pics*
#22
Registered User
Thread Starter
Join Date: Feb 2007
Location: NW PA
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
Very clean...how much lift do you have? If I read the sidewall right those are 285's...how the heck did you clear em with the A-Arm? I had to swap my Limited 5-spokes out with the Lexus LX450 Rims in order to clear.
I like how you kept it nice and subtle yet very capable and rugged looking.
Nice work,
Fink
I like how you kept it nice and subtle yet very capable and rugged looking.
Nice work,
Fink
Thanks for all of the kind words everyone!
Yes, they are 285's. I have about 2.5 in. in the front and about 3 in the back. I'm heading out to take pics of the a-arm clearance right now. I'll also take some measurements and post them up too.
Last edited by MATT0404; 04-19-2007 at 08:27 AM.
#23
Registered User
Join Date: Aug 2005
Location: Spencer, Iowa
Posts: 887
Likes: 0
Received 0 Likes
on
0 Posts
That would be sweet to see! Take some of the clearance around the front valance and where the mud flap would be. If everything looks ok, I've just found my next set of meats! Thanks!
#24
Registered User
Thread Starter
Join Date: Feb 2007
Location: NW PA
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
Alright, here are some pics that I just took.
A-arm clearance:
And here are measurements from the ground to the bottom of the fender flares:
Rear:
Front:
A-arm clearance:
And here are measurements from the ground to the bottom of the fender flares:
Rear:
Front:
#27
Registered User
Thread Starter
Join Date: Feb 2007
Location: NW PA
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
Glad I could help you with your decision. Just keep in mind that fitting 285's seems to differ from rig to rig. I was completely ready to shave my a-arms or buy new wheels if it came to that. They'll look great on your rig though!
#28
Registered User
Join Date: Aug 2005
Location: Spencer, Iowa
Posts: 887
Likes: 0
Received 0 Likes
on
0 Posts
It completely mystifies me why 285's will fit some Runners and not others. When it comes time for tires, I'll just have to test fit a set and see what happens. It looks like the Bighorn's side biters don't stick out quite as far as some other M/T style tires. Maybe that's the secret?
#29
Registered User
Join Date: Oct 2006
Location: Ventura CA
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Great looking truck and great pictures!
This is an understatement regarding your WRX collection...
This is an understatement regarding your WRX collection...
#30
Registered User
Thread Starter
Join Date: Feb 2007
Location: NW PA
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
It completely mystifies me why 285's will fit some Runners and not others. When it comes time for tires, I'll just have to test fit a set and see what happens. It looks like the Bighorn's side biters don't stick out quite as far as some other M/T style tires. Maybe that's the secret?
Wantsti: Thanks for the compliments!
#31
Registered User
Join Date: Aug 2005
Location: Spencer, Iowa
Posts: 887
Likes: 0
Received 0 Likes
on
0 Posts
[quote=Matthew0404;50506931]Too bad your in Iowa or I'd let you test fit mine. quote]
That would be cool...but one heck of a drive! DOH!! Did you need to do any trimming of the pinch weld, inner fender well or front valance? With my luck, I'd order a set from ebay and the darn things wouldn't fit!
That would be cool...but one heck of a drive! DOH!! Did you need to do any trimming of the pinch weld, inner fender well or front valance? With my luck, I'd order a set from ebay and the darn things wouldn't fit!
#32
Registered User
Thread Starter
Join Date: Feb 2007
Location: NW PA
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
[QUOTE=emptypockets;50506978]
Looks like I may have to trim the front valance a little. It's fine for daily driving, but rubs under compression.
On another note. I was pulling out of a mud hole yesterday(tires performed superb!), the rear axle flexed while traversing the ditch, and I heard a loud POP. Look what I found...
Looks like I have some work to do this weekend.
Too bad your in Iowa or I'd let you test fit mine. quote]
That would be cool...but one heck of a drive! DOH!! Did you need to do any trimming of the pinch weld, inner fender well or front valance? With my luck, I'd order a set from ebay and the darn things wouldn't fit!
That would be cool...but one heck of a drive! DOH!! Did you need to do any trimming of the pinch weld, inner fender well or front valance? With my luck, I'd order a set from ebay and the darn things wouldn't fit!
On another note. I was pulling out of a mud hole yesterday(tires performed superb!), the rear axle flexed while traversing the ditch, and I heard a loud POP. Look what I found...
Looks like I have some work to do this weekend.
#35
Registered User
Thread Starter
Join Date: Feb 2007
Location: NW PA
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
Awww, don't cry...you can have it back...let's say $20,000?? How's everything in MI?
Quick update. 1 in. body lift has successfully been installed. I ordered the RB/4crawler kit. Install was easy and only took about two hours to complete. I also just got myself a new digital SLR. Guess it's time for a new photoshoot. Stay tuned for more pics.
Quick update. 1 in. body lift has successfully been installed. I ordered the RB/4crawler kit. Install was easy and only took about two hours to complete. I also just got myself a new digital SLR. Guess it's time for a new photoshoot. Stay tuned for more pics.
Thread
Thread Starter
Forum
Replies
Last Post
LittleUgly
86-95 Trucks & 4Runners (Build-Up Section)
15
01-02-2020 01:30 PM
charlie_fong
General Vehicle Related Topics (Non Year Related)
0
09-27-2015 10:06 PM