Lets have some lifted measurements.
Apr 18, 2004 | 09:29 PM
#21
Contributing Member
Joined: Apr 2003
Posts: 2,549
Likes: 0
From: Albuquerque, NM
Originally Posted by waskillywabbit
Both front and rear are 41" from ground to center of bottom of fender well.
You have 3" over me??? I wonder what the difference between the flares and non flares is?
Apr 18, 2004 | 10:12 PM
#22
Thread Starter
Registered User
Joined: Jul 2003
Posts: 392
Likes: 0
From: Hawaiian Islands
Originally Posted by SteveO
How about we set a standard here. Such as measuring from the ground to the center of the both fender wells? That will give us an average of what the overall lift of the vehicle is. For example, I may have larger tires than some, but a smaller lift than others, and vice-versa. This measurement will take into account larger tires, suspesnsion and body lift.
Apr 19, 2004 | 05:35 AM
#27
Contributing Member
Joined: Oct 2002
Posts: 1,843
Likes: 0
From: NM
Originally Posted by Jboy
Yeah I guess no one caught on to where I measured. Now I`ll have to go back outside and measure again.
Apr 19, 2004 | 05:37 AM
#28
Hmmm
Originally Posted by Albuquerque Jim
Serious???
You have 3" over me??? I wonder what the difference between the flares and non flares is?
You have 3" over me??? I wonder what the difference between the flares and non flares is?
Apr 19, 2004 | 05:40 AM
#29
2" RB BL
Originally Posted by SteveO
How do you like the 2" RB lift. Is it pretty noticable. How does it feel on the road?
It rides great! The only way you tell I have a BL is the front bumper gap, but it doesn't bother me, so I'm not going to mess with it. I too was suprised when I measured how high I'm up there, but again, it's a relatively new lift and I'm sure it'll sag a bit over time...
Apr 19, 2004 | 05:48 AM
#30
Contributing Member
Joined: Oct 2002
Posts: 1,843
Likes: 0
From: NM
Originally Posted by waskillywabbit
I love my ride's ride. It rides great! The only way you tell I have a BL is the front bumper gap, but it doesn't bother me, so I'm not going to mess with it. I too was suprised when I measured how high I'm up there, but again, it's a relatively new lift and I'm sure it'll sag a bit over time...
It rides great! The only way you tell I have a BL is the front bumper gap, but it doesn't bother me, so I'm not going to mess with it. I too was suprised when I measured how high I'm up there, but again, it's a relatively new lift and I'm sure it'll sag a bit over time...
Apr 19, 2004 | 01:59 PM
#31
Contributing Member
Joined: Apr 2003
Posts: 2,549
Likes: 0
From: Albuquerque, NM
Originally Posted by SteveO
Thats what I'm hoping for, that sagging action. According to All Pro, their springs are pre-cycled, so they shouldn't sag that much. However, we shall see. I have yet to really flex em out hard and see what they can really do.
Apr 19, 2004 | 02:23 PM
#32
Away
Joined: Oct 2002
Posts: 1,588
Likes: 0
From: Beaverton, OR
Front 38" Fender to ground
Rear 38.5" Fender to Ground
I have the little chrome trim pieces still attached. With my all silver truck, they're not really all that noticeable, but that may affect the measurement a bit. I know my truck is about 4" taller overall than stock 3rd Gen 4Runners.
Peace.
G
Rear 38.5" Fender to Ground
I have the little chrome trim pieces still attached. With my all silver truck, they're not really all that noticeable, but that may affect the measurement a bit. I know my truck is about 4" taller overall than stock 3rd Gen 4Runners.
Peace.
G
Thread
Thread Starter
Forum
Replies
Last Post
justdifferentials
Vendors Build-Ups (Build-Up Section)
0
Sep 5, 2015 06:52 PM
joeynational
86-95 Trucks & 4Runners
1
Sep 5, 2015 01:54 PM
