Help deciding wheel for my tacoma
#1
Registered User
Thread Starter
Join Date: Mar 2004
Location: Alabama
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
Help deciding wheel for my tacoma
Aighty here goes once again,
I got a 99' tacoma (Ex Cab). It has a 2" RB and a 3" CF. I will do the Pinch weld mod also. Ok i have two sets of rims one is brand new and looks way better and I really want to run these, they are 15x10 Eagle alloys with -46mm offset, I also have the same thing for the other set, but are worn and dont look near as good. They though are 15x8 instead of 15x10 (not sure on offset). Somebody please tell me if I am going to rub. And if so how much and doing what (ex hard core flex, turning). Please dont tell me im gonna hafta use the 15x8s..........
remember 5" lift and Pinch weld mod
thanks
I got a 99' tacoma (Ex Cab). It has a 2" RB and a 3" CF. I will do the Pinch weld mod also. Ok i have two sets of rims one is brand new and looks way better and I really want to run these, they are 15x10 Eagle alloys with -46mm offset, I also have the same thing for the other set, but are worn and dont look near as good. They though are 15x8 instead of 15x10 (not sure on offset). Somebody please tell me if I am going to rub. And if so how much and doing what (ex hard core flex, turning). Please dont tell me im gonna hafta use the 15x8s..........
remember 5" lift and Pinch weld mod
thanks
Last edited by MxPx_Reaver; 08-17-2004 at 03:39 PM.
#2
Registered User
Thread Starter
Join Date: Mar 2004
Location: Alabama
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
If I won't be able to use the 15x10s, I would appreciate some help in making my 15x8s look chrome again. They are EXTREMELY dull and cloudy looking.
Thread
Thread Starter
Forum
Replies
Last Post
Flying91
86-95 Trucks & 4Runners (Build-Up Section)
45
04-11-2024 04:39 PM
BeMiceElf
Misc Stuff (Vehicle Related)
7
10-10-2015 09:40 PM
GreatLakesGuy
The Classifieds GraveYard
8
09-04-2015 09:27 AM