FJ Crusier Wheels with Tundra Brake Upgrade??
#41
Registered User
Join Date: Feb 2008
Location: Fletcher Hills, CA
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
Dudes.
Just finished the Tundra brake jobbie on a '97 4R. Used the big calipers. Had to grind material off the back of the double-three spoke 4Runner 16x7, but not a lot. Could have done the caliper instead, but there's a lot more spare metal on the wheel. It was in a spot just outside of the hub-face (on the rim), and nothing that contributed to wheel strength. About 5mm worth of spacer would probably have done the job too, but I likes my wheel-well clearance.
Of course, that's a 4Runner, so that info is good for what it is. My suggestion with aftermarket wheels is try 'em on - always try 'em on.
STICK
Just finished the Tundra brake jobbie on a '97 4R. Used the big calipers. Had to grind material off the back of the double-three spoke 4Runner 16x7, but not a lot. Could have done the caliper instead, but there's a lot more spare metal on the wheel. It was in a spot just outside of the hub-face (on the rim), and nothing that contributed to wheel strength. About 5mm worth of spacer would probably have done the job too, but I likes my wheel-well clearance.
Of course, that's a 4Runner, so that info is good for what it is. My suggestion with aftermarket wheels is try 'em on - always try 'em on.
STICK
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
Suprarossa
99+ Tundra, 00+ Sequoia, 98+ Land Cruiser/LX470
0
07-06-2015 05:21 AM