Ok, here is the deal, i want to add power windows and locks to my truck. I obtained circuit diagrams for both from prior posts on here. I looked over the diagrams for a little while, and although i sorta understand them, i am not wonderful at reading them. So what i would like is for somebody who is really good at reading them to look over them, and either explain or draw out a more simple layout of it, basically in lamens terms. What im trying to figure out is what all i need to do the conversion, so i can get the parts, and how simple or complex it is gonna be. Like do for the windows, do i just need to get the regulator (with motor), door panel (with switches), and the harness? Does it have the plug already? Are there any modules, and/or relays required? I know it shows some relays in the diagram. I have experience with wiring, i am not a complete newb, i know how wiring works, so if i need to do some custom wiring to rig it up, thats all good.

Here are the diagrams, previously posted by Flamedx4 (thanks man!)

Power Windows:
https://www.yotatech.com/attachment....achmentid=4470

Power Locks:
https://www.yotatech.com/attachment....achmentid=4455

Kudos to whoever can help me!

 

Nobody?

 

Making the harness and door control module is quite easy. I made mine with a little help from my buddy eBay. Maybe you've heard of him.

I have both door harnesses and the door control module from a '94 on me. If you're interested, PM me. I never went on with my conversion. :pat: