I am in the process of having a center protector or bull bar built for my 04 runner. The guy is draging his feet a bit in my opnion but it's a smallish job for him. I called a local 4x4 shop and they gave me the # of a welder who fabs all there roll chages and stuff. Same type of idea, the top bar is about 3 inches above the bumper and will have 3 light tabs. don't know if I will use all 3 or not. Some of the photos have the lights in the center. I wanted mine up top but not too high. The lights should be about level with the hood or slightly above. It will mount with 3 bolts through the frame on each side. Just going to rattle can it black. Had a "true radius bending" brush gard on my old rig and loved it. Not a big fan of the ones out now for the new runner so I hade one built. JAOS is wicked but tons of $$$$$$$.