Automatic into a 5spd
#1
Registered User
Thread Starter
Join Date: Nov 2007
Location: O'Side, Cali
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Automatic into a 5spd
I have a 98 4runner 4 cyl 2.7L automatic. Im wanting to drop a 5 spd in it and get 4.88 or 5.29 gears too. Which would be best for the 5 spd and how much do u think it would cost to do that. Wanting to drive hwy @ 75 and be able to hit the trail at a moments notice too... im leanin toward the 4.88 gears and maybe a locker but not sure yet.. help me figure this out!!
#3
You wanting to keep the 31" tires, and go with the 5speed? I would say 4.56 is going to be good with 31-33" tires, or 4.88 if you are definetly going to be running at least 33"s
I have a 5speed 2.7 with 4.56 and 32"s and its nice. I am also getting a locker, actually putting it in tomorrow.
Here is a picture of cruising along at 70.
I see you like the vols, I am a jr at Tennessee
I have a 5speed 2.7 with 4.56 and 32"s and its nice. I am also getting a locker, actually putting it in tomorrow.
Here is a picture of cruising along at 70.
I see you like the vols, I am a jr at Tennessee
Last edited by crolison; 11-08-2007 at 04:18 PM.
#4
Contributing Member
4.88's and 5.29's are some gears you'll want for way larger tires...IMO. But, its hard to say.
I run 35's on 4.30's (I've got a V6) and its pretty darn nice.
And again... Stop calling it Cali...!!! For the LOVE of GOD!!! haha. No seriously.
I run 35's on 4.30's (I've got a V6) and its pretty darn nice.
And again... Stop calling it Cali...!!! For the LOVE of GOD!!! haha. No seriously.
#5
Registered User
Join Date: Oct 2007
Location: Tuscaloosa, AL
Posts: 705
Likes: 0
Received 0 Likes
on
0 Posts
yeah, i'd say go with something like the 4.56s with the 5-speed if your actually gonna do the swap, as anything lower than that will make your rpms go up even higher...
#6
#7
Registered User
Join Date: Oct 2007
Location: Tuscaloosa, AL
Posts: 705
Likes: 0
Received 0 Likes
on
0 Posts
yeah, those 33s might will give ya some better cruising speeds. one question though: i'm pretty sure i have 4.10s in my 4runner, as i turn exactly 3000 rpms when at 80 mph. can you read the VIN to determine the gears?
Trending Topics
#8
you can read the vin and tell what gears you got. also you can call the dealer and they should be able to tell you.
With the v6 5speed and no elocker, you most likely have 4.10's
With the v6 5speed and no elocker, you most likely have 4.10's
#9
Registered User
Thread Starter
Join Date: Nov 2007
Location: O'Side, Cali
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
well thanks for all the input guys... and crolison i freakin love the VOLS... but on the thread how much would it cost for the swap... and i was gonna run 33's on the Black Death... right now im just tryin to figure out what i need to do first...
#10
Well it will probably be cheaper to sell your 4runner, and find a 5speed. Gotta get the tranny, transfer case, all the clutch stuff, ecu for a manual, and wire it all up.
Not sure exactly what all goes into the swap, and costs.
Not sure exactly what all goes into the swap, and costs.
#14
how badly will performance be affected if you keep the auto and put 33s? how much would you have to regear ?
how adversely would highway performance be affected?
most importantly to me, how much more gas would be wasted?
sorry if i jack your thread, i was about to ask a simliar question, and didnt want to be repetitive...
thanks in advance,
-Kino
how adversely would highway performance be affected?
most importantly to me, how much more gas would be wasted?
sorry if i jack your thread, i was about to ask a simliar question, and didnt want to be repetitive...
thanks in advance,
-Kino
Thread
Thread Starter
Forum
Replies
Last Post