ARB bumper and A/C drier
06-21-2009, 01:56 PM
#1
Registered User
Thread Starter
ARB bumper and A/C drier
While under my 4runner I noticed that my ARB bumper was touching the side of the A/C drier/receiver. I pulled the ARB loose and could see a shiny spot where the bumper was rubbing.
I was able to bend the bracket on the drier back about 3/8" and glued a piece of pipe insulation foam on the drier and hopefully avoided what could be a PITA later on.
Just something to look at next time your under your runner/taco.
I was able to bend the bracket on the drier back about 3/8" and glued a piece of pipe insulation foam on the drier and hopefully avoided what could be a PITA later on.
Just something to look at next time your under your runner/taco.
Thread
Thread Starter
Forum
Replies
Last Post
choppe777
Axles - Suspensions - Tires - Wheels
5
05-16-2016 08:00 AM
FS[PacNorWest]: 1993 4 Runner, V6, 4wd, Auto,
AkitaDog
Vehicles - Trailers (Complete)
0
09-03-2015 09:01 PM
