ADD Hubs to manual hubs

Reply Subscribe

Thread Tools

Search this Thread

Jan 13, 2005 | 08:11 AM

corvettelvr73

Thread Starter

Registered User

Joined: Mar 2004

Posts: 411

Likes: 0

From: Charlotte, North Carolina

ADD Hubs to manual hubs

I have a friend with a "92 pickup with manual locking hubs. My '95 4runner has ADD hubs. How hard or is it possible to put the manual hubs from the '92 on my 4runner.

Jan 13, 2005 | 09:05 AM

wvuviv30

Registered User

Joined: May 2004

Posts: 336

Likes: 0

From: Lusby, MD

easy... take off the ADD hubs... and put the manuals on..

Jan 13, 2005 | 09:08 AM

-MaTTi-

Registered User

Joined: Oct 2004

Posts: 140

Likes: 0

From: Finland

Quote:

Originally Posted by corvettelvr73

I have a friend with a "92 pickup with manual locking hubs. My '95 4runner has ADD hubs. How hard or is it possible to put the manual hubs from the '92 on my 4runner.

It´s very simple. I just done this last weekend (½ hour). Check some instructions here: http://personal.utulsa.edu/~nathan-b...14freewhee.pdf

Jan 13, 2005 | 09:22 AM

joatmon

Registered User

Joined: Jun 2004

Posts: 40

Likes: 0

From: SoCal

There are two articles on www.4x4wire.com that explain how to convert to manual hubs.

Jan 13, 2005 | 09:25 AM

mt_goat

Contributing Member

Joined: Nov 2002

Posts: 10,666

Likes: 5

From: Oklahoma State

Quote:

Originally Posted by corvettelvr73

I have a friend with a "92 pickup with manual locking hubs. My '95 4runner has ADD hubs. How hard or is it possible to put the manual hubs from the '92 on my 4runner.

The hardest part is getting those cone washers off. I found taking a brass drift and hitting the sides of the washers all the way around the stud was the easyest way to get them off. Some say to screw the nut onto the stud and hit the stud with a hammer but that didn't work for me.

Those instructions posted above by Matti seem to mainly cover rebuilding the manual hubs.

Last edited by mt_goat; Jan 13, 2005 at 09:32 AM.