881/890 setup 10mm front spacers or not?
#1
881/890 setup 10mm front spacers or not?
Sitting on 265/75 Cooper STT tires now, 3.4 5 speed 1 owner till I picked it up a couple years ago. Finally time to swap out the coils and struts.
Its a 98 but sits as high as any 99 I' ve seen from level floor to fender 35 in front 35.5 in back little front lean on driver side.
Anyway....does anyone run the OME setup 881/890 (I will use the Bilsteins) but I'm torn on if I need the front 10mm spacer...I've seen some pics with about 1" rake and some that are pretty level seems like most I have read are not using a spacer.
I do like the level look but don't mind .5" maybe .75".
Any info is appreciated.
Its a 98 but sits as high as any 99 I' ve seen from level floor to fender 35 in front 35.5 in back little front lean on driver side.
Anyway....does anyone run the OME setup 881/890 (I will use the Bilsteins) but I'm torn on if I need the front 10mm spacer...I've seen some pics with about 1" rake and some that are pretty level seems like most I have read are not using a spacer.
I do like the level look but don't mind .5" maybe .75".
Any info is appreciated.
Thread
Thread Starter
Forum
Replies
Last Post
FS[PacSouthWest]: 2- 8"3rd members:4.88 ratchet lockers,new setup kit, rear axle rebuild kit,diff armor
jerusry
Axles - Suspensions - Tires - Wheels
1
10-19-2015 05:28 PM
GreatLakesGuy
The Classifieds GraveYard
8
09-04-2015 09:27 AM
coffey50
Offroad Tech
17
07-28-2015 10:55 AM
terminator
Misc Stuff (Vehicle Related)
3
07-27-2015 07:13 PM