ive been working on mine for the past 3-4 days and wow it really is a challenge. i have fun doing it but im starting to lose motivation as its getting impossible to aim correctly.

if anyone that has done the 3rd gen projector retrofit.
let me know if you want to sell.
i can trade my parts plus cash

05 TL projectors
ZKW clear lens (already swapped in)
i also have the TL lens that came with the original
gatling shrouds
TL ballasts
Phillip 85112+ bulbs
02 4runner housings Blacked out housing.

but yeah its really hard and im in pain HAHAHA
but ill keep at it, but if someone can shoot me a deal then ill be happy to consider it.

 

so my screws holding m projector in place are too long anyone know what's the best way to cut a screw shorter? without much vibration and moving around of it? thank you

 

A Dremel is your friend

 

Good luck man...that mod isn't easy! I'm hoping Rockslide will retire extra early (I know he'll glance at this post) so I can send him all my parts and he could construct mine for me

 

I'll try the dremel I was even thinking hacksaw but overall I'm really worried on vibration and messing up the lining if the headlight if that happens I'll have to start all over =.=

I'll keep everyone posted

 

Might be easier to just buy some shorter screws

 

only problem is everything is all JB welded in =.=
i know, i messed up ahha

 

Shoulda went with the ebay projectors. Reasonable quality, great ouput and cutoff, cheap and super easy to install. I have the "G1" projectors, but right after I bought them, I found much larger ones (G3 projectors) that give a bit more output. I'm satisfied with what I have though. Much better than HIDs in stock housings. The align just like stock, too.



Don't have a pic in front of a wall...

Only issue I forsee is finding replacement bulbs. Socket is for D2S/R, but the mounting ring would interefere with the D2-type plug. Need something with pigtails.

 

nice lights. where did you get them from. I just looked on Ebay and couldn't find any.

 

ebay projectors, arent my style. for projectors i had to go with some good ones so i did my research and got what i feel was the best one for me. TL/zkw lens
but yeah ill pos pics in a bit, worked on it last night and finally cut all the screws.
thanks to everyone who said dremel. i got a dremel with ez lock and metal bit i ended up cutting all 8 screws in about 10 minutes.


update as of last night also is that i tried aiming only ONE headlight. and wow it took forever. finally got a good angle, ill get pics dont worry , but the driver side.. like they say if its not one thing.. its the other...
the driver side housing wont go in because the d2s ignitor hits the coolant case.. =.=
i have no idea what to do now. so as of last night thats where im at. ill get a go at it today.

 

this

never seen any that i can remember, get some more pictures and specs of yours