1st gen efi line info.
#1
1st gen efi line info.
maybe someone could use this info. So here it is. When i was at the junkyard the other day I got a much needed efi line for my 4runner. There r some differences in the lines i noticed. I notice that 1 4runner that was a first generation body style had a in line filter on the frame. Where as the one I used went straight to the engine almost except ended into a fuel filter attached to the block. I believe the one with the filter on the frame was a automatic as i noticed a tranny cooler there. i got my line off a 86 and it was identical to the 87 fuel line i had except not rotted out...lol.
#4
Registered User
Joined: May 2004
Posts: 3,291
Likes: 0
From: 100 miles offshore as much as possible, & Springfield Oregon USA
Yeah, they didn't do us a favor with that location on the back of the block, did they? It is the most impossible to service maintenance item I have ever seen.
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
Jun 1, 2021 01:51 PM
the1998sr5
95.5-2004 Tacomas & 96-2002 4Runners
15
Jul 14, 2020 08:35 PM
FS[SouthEast]: 1st Gen 4Runner Slider Window, Driver Side
coryc85
Misc Stuff (Vehicle Related)
0
Jul 6, 2015 04:07 AM




