1.5" BL + Downey HD shackles + Shocks???
#1
Registered User
Thread Starter
Join Date: Jan 2005
Location: Moreno Valley, Ca
Posts: 571
Likes: 0
Received 0 Likes
on
0 Posts
1.5" BL + Downey HD shackles + Shocks???
ok, please someone point me in the right direction. I have a 91' 4x4 std cab v6. I'm looking at doing a 4crawler 1.5" BL, Downey HD shackles, crank the torsion bars. Now at this time I'm ready to replace my shocks and from the research I want to go with Skyjacker shocks. Now my question...
Should I go with the shock that is rated for "0 - 2 inches" of lift or do I need the "3 - 4 inches" of lift?
Sorry a newb here. I understand that the torsion bars and shackles will yield approximately 1.5" inches of lift and this points me to the "0 - 2 inch" range, as I don't include the BL into the shock formula. I just want to make sure that I'm looking at this correctly before ordering.
Thanks
-=Morphine=-
Should I go with the shock that is rated for "0 - 2 inches" of lift or do I need the "3 - 4 inches" of lift?
Sorry a newb here. I understand that the torsion bars and shackles will yield approximately 1.5" inches of lift and this points me to the "0 - 2 inch" range, as I don't include the BL into the shock formula. I just want to make sure that I'm looking at this correctly before ordering.
Thanks
-=Morphine=-
Thread
Thread Starter
Forum
Replies
Last Post
dirk89
86-95 Trucks & 4Runners
2
10-01-2015 05:15 PM