WHAHAHAJR 1992 22RE 4x4 build or should I say rebuild
#81
Registered User
Join Date: Mar 2009
Location: (LSD) Lower Slower Delaware
Posts: 1,169
Likes: 0
Received 0 Likes
on
0 Posts
Good thing your not in one of these states that check those things. I did EGR bypass in my diesel vw it works great no carbon build up in the intake. Only by product is smoke lots of smoke.
#85
Registered User
Thread Starter
Join Date: Jan 2011
Location: New Braunfels, Tx
Posts: 330
Likes: 0
Received 0 Likes
on
0 Posts
Well the pcv hose was cracked. So put a new pcv valve with grommet and hose. Put a pcv with a 90 and used a straight hose. The old pcv was a PITA!
#86
Registered User
Thread Starter
Join Date: Jan 2011
Location: New Braunfels, Tx
Posts: 330
Likes: 0
Received 0 Likes
on
0 Posts
Parts came in from LCE. PAIR and EGR are a thing of the past. Now I just need to figure out which lines to block off.
Last edited by WHAHAHAJR; 01-16-2012 at 02:41 PM.
#89
Registered User
Thread Starter
Join Date: Jan 2011
Location: New Braunfels, Tx
Posts: 330
Likes: 0
Received 0 Likes
on
0 Posts
Got a new tool box. Been looking for awhile on CL. Got it with keys for $70.00. Decent deal I think for the area.
Forgot my tape measure when I bought it and just took the guys word it would fit.
The more I looked I thought it was to big?
The test fit...
After install. Next morning...
Forgot my tape measure when I bought it and just took the guys word it would fit.
The more I looked I thought it was to big?
The test fit...
After install. Next morning...
Last edited by WHAHAHAJR; 03-05-2012 at 05:27 PM.
#90
Registered User
Thread Starter
Join Date: Jan 2011
Location: New Braunfels, Tx
Posts: 330
Likes: 0
Received 0 Likes
on
0 Posts
I think its time to take the bolts off the lift or whole front end and lock tight everything...
This is what I had to deal with last Thursday night. The bolts grew legs and disappeared from the front diff drop bracket on the drivers side. When I put it in 4wd it snapped the LH CV shaft.
For everyone with lifts. I recommend re-torquing and putting lock tight on all your bolts. Easy to do befire it gets to this.
This is what I had to deal with last Thursday night. The bolts grew legs and disappeared from the front diff drop bracket on the drivers side. When I put it in 4wd it snapped the LH CV shaft.
For everyone with lifts. I recommend re-torquing and putting lock tight on all your bolts. Easy to do befire it gets to this.
Last edited by WHAHAHAJR; 03-05-2012 at 05:21 PM.
#91
Registered User
Thread Starter
Join Date: Jan 2011
Location: New Braunfels, Tx
Posts: 330
Likes: 0
Received 0 Likes
on
0 Posts
Also removed the sway bar. I snapped one of the sway bar links. So just left it off. I have new links and bushings but of coarse put them in a spot where I would not forget where they are? Now just can't find them...
#94
Registered User
Thread Starter
Join Date: Jan 2011
Location: New Braunfels, Tx
Posts: 330
Likes: 0
Received 0 Likes
on
0 Posts
Also this weekend I had my muffler welded back up and made a new battery bracket. Then I put my washer reservoir back on. Which I now found out is not working. Need to check for power then check for any blockage.
#97
Registered User
Thread Starter
Join Date: Jan 2011
Location: New Braunfels, Tx
Posts: 330
Likes: 0
Received 0 Likes
on
0 Posts
#98
Registered User
Join Date: Jun 2012
Location: Jasper, Al
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
Nice, I bet it does. I'm suppose to be going to pick up a 92 this Saturday, basically going to rebuild it as well. At the moment it has 35 12.50's on it, I will be going down to 33 12.50 as soon as possible as well though.
EDIT: I like the rims you got as well. Could you take a better full body picture of it? I'd like to see what it looks like as a whole.
#99
Registered User
Thread Starter
Join Date: Jan 2011
Location: New Braunfels, Tx
Posts: 330
Likes: 0
Received 0 Likes
on
0 Posts
Nice, I bet it does. I'm suppose to be going to pick up a 92 this Saturday, basically going to rebuild it as well. At the moment it has 35 12.50's on it, I will be going down to 33 12.50 as soon as possible as well though.
EDIT: I like the rims you got as well. Could you take a better full body picture of it? I'd like to see what it looks like as a whole.
EDIT: I like the rims you got as well. Could you take a better full body picture of it? I'd like to see what it looks like as a whole.
Last edited by WHAHAHAJR; 06-29-2012 at 07:40 PM.
#100
Registered User
Thread Starter
Join Date: Jan 2011
Location: New Braunfels, Tx
Posts: 330
Likes: 0
Received 0 Likes
on
0 Posts
Took these yesterday. The lighting makes it look like I cleaned it up but I did not.
The new meats
The new meats
Last edited by WHAHAHAJR; 06-16-2012 at 04:29 PM.