ToyoTech559

thanks. i wont be running those rims. too wide and the 32x11.5 took forever to set the bead lol. i cheated on that last picture. its still on the lift so its at full droop

ToyoTech559

so after finally finding time to finish my elocker and alot of trial and error. (paying someone on the next one for sure lol) i think if i made a stand for doing regearing i wouldnt mind so much since i made some special tools for it already. anyways i just need to mod the spare axle housing, install and break in the gear set. if that all goes
well i will be working on the wiring.

best pattern i could get
Shim .086
BL 0.009




the actually backlash i used was .010

dropzone

iTrader: (6)

no expert but it looks like the pattern could go more towards the middle

ToyoTech559

i know. but i cant get it any more without opening the backlash more. its already at .010 and i was shooting for .007 the yukon book says not to worry so much where it sits from top to bottom but more center left to right. i had zuk look at it and said its the best im gonna get on the gear set i got. they are yukon gears and went with them since marlin only sells the best. than i find out that yukon out sources all their stuff. if i have know i would have gone with a different brand. gonna run it and if it blows up it blows up. i have another elocker with a few teeth broken off. ill have someone else set up the next one and sell the old one.

ToyoTech559

your just trying to get depth correct with a nice round pattern
i guess i have more of this



COMPETITION CONTACT Pattern concentrated just up from the toe covering 1/3 to 1/2 of the tooth.

http://www.precisiongear.com/pgtechpatterns.htm

vang_22re

I got dibs on the diff!! I called it haha

Are you Gona get new tires with those new gears

ToyoTech559

im gonna run the 32s i have with the 4.88 gearing. the automatic trans should allow me to run that high of a gearing with those tires and not be to much of a problem. i really dont wanna run any larger since the 32s are brand new and rub at full tuck and cranked left or right. (dont normal see this condition when i off road)

jswizz

Hi there ToyoTech559 that is a very clean yota 4runner it reminds me of mine a bit with the total package with inclometer and sunroof etc... scored mine last june for a good deal and am loving it keep up the build .

ToyoTech559

thanks, its funny how growing up with this runner i had never had any interest. i started just fixing all the little stuff wrong with it for my parents and somehow i ended taking it lol. i current have 2 newer cars (94 n 06) and i would trade both of them in to have this old runner lol

Outsane

nice score on the gears with the set up kit at half price ..I was really tempted..

let me know what you think of the 4.88's

I have been going back on forth on 4.88's or 5.29's

ChefYota4x4

iTrader: (5)

Nice, .... GET 'CLIMBING', HOMIE! LOL. Pound those welds, too....

Just curious... The 32's on my rig don't rub at all. I think it's cuz of my offsetting on the outlaw2's I picked up. The lil lift helped a bit, but the backspacing is what I think is keeping me from rubbing(HOWEVER, they do rub on rare occasion on the front mudflaps, lol).

ToyoTech559

4cylinder with 31s. im sure with 4.88 would be a nice. the 5.29 might be too much for that size tire unless you dont plan on driving it at high speeds much

with the spacers. it makes my currect backspacing at 3.75" the 32s are also brand new and compare to my old 32s with less than half its life left added alot more height to the rubber. i have only rubbed it once and it was a really twisted up trail lol was full tuck and steering crank all the way to the left. also my low profile bump stops probably didnt help lol

snow wheeling my wheels usually straight and not alot of flex is needed hehe just traction

ChefYota4x4

iTrader: (5)

Gotcha, ..... and, .......LOVE your rig!

ToyoTech559

thanks and yours is coming along nicely. seems like we are doing similar things. i been needing to upgrade my stereo lol speakers all around and a deck. plus i want your wheels. super hard to find 15x8 alloy wheels with 3.75 backspacing

ToyoTech559

done. just need to do the housing so i can get this installed and break it in. than do the wires

ChefYota4x4

iTrader: (5)

Sick! Congratz!

ChefYota4x4

iTrader: (5)

Dang tablet! Hit a key and unsubscribed...grrr, lol...fixed now, sorry!

ToyoTech559

thanks. we will know soon enough if it was set up correctly. if not i got another one i will let the pro regear for me if anything happens to this one

ToyoTech559

finally got to working on the rear diff. threw some welds down and grinded down smooth. still need to cut the notches out and tap the 4 holes. should have the notches out tomorrow but left the tap and die set at work. so much work lol need to get this done so i can get out to do some snow wheeling




my ugly weld lol FIPG will seal up anything i missed

john4wd

I would love a electric locker in mine, would be sweet :}