kelvin 1989 4runner build
07-31-2014, 07:04 AM
#209
Registered User
Thread Starter
Installed shocks and this is how it sits. According to the space between the shock tube and shaft eye I need to lift it with blocks or add a leaf. Maybe 2in space.
08-03-2014, 05:25 PM
#213
Registered User
Join Date: Aug 2014
Location: Upstate SC
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
yesterday i hit the local upullit to where i found the sr5 i pulled the cluster out of, and someone took the pressure sensor out of it before i could get it. fortunately for me another sr5 was a few rows back and already had the engine yanked out and on the ground, pressure sensor side facing up. i also stole got a new tail light lense as mine was cracked. total spent = 21.00
my tach doesnt work, which i have yet to deal with and the connector for my oil pressure sensor had to be modified to clip on to the new pressure sensor. oil pressure, volt meter and speedo works. i didnt drive it long enough to see if the water temp moved, and i cannot confirm whether the fuel gauge works.
i was invited saturday to go run through another part of the river, good thing i didnt
my tach doesnt work, which i have yet to deal with and the connector for my oil pressure sensor had to be modified to clip on to the new pressure sensor. oil pressure, volt meter and speedo works. i didnt drive it long enough to see if the water temp moved, and i cannot confirm whether the fuel gauge works.
i was invited saturday to go run through another part of the river, good thing i didnt
