86-95 Trucks & 4Runners (Build-Up Section) Post your build-ups here

Beast in the making...

Old 10-29-2013 | 01:30 PM
  #81  
FinishThaGame's Avatar
Thread Starter
Registered User
 
Joined: Apr 2013
Posts: 231
Likes: 0
From: Ocala, Florida
I found that i have a whole in my gas tank in the lowest part of the top of my tank. Ordered a new tank for $197 shipped from my mechanic friend, until then i cant fill it more than 3/8 full....

Also (after reading tons of theads on here as well as other sites) i ordered 3 quarts of Redline MT 90 gear oil for changing my tranny fluid. I checked it because my tranny started to smoke and overheat the other day, when i checked it it was very bubbley and looked like it had water in it. So ill be changing that soon.

I finally got my exhaust done, and it came out pretty nice, it reduced the drone in cab drasticly, it also seems to respond better on the low end acceleration. Will be uploading a before and after video soon. Heres some pics.
Old 10-29-2013 | 01:36 PM
  #82  
HighLux's Avatar
Registered User
 
Joined: May 2010
Posts: 2,587
Likes: 7
From: Ofallon Missouri
Like the truck....give us a nice side shot. Want to see the color better.
Old 10-29-2013 | 03:03 PM
  #83  
FinishThaGame's Avatar
Thread Starter
Registered User
 
Joined: Apr 2013
Posts: 231
Likes: 0
From: Ocala, Florida
Ok will do, my wife just got a.new iPhone so someday soon im gonna take some good pics and videos, soon.
Old 10-29-2013 | 03:26 PM
  #84  
FinishThaGame's Avatar
Thread Starter
Registered User
 
Joined: Apr 2013
Posts: 231
Likes: 0
From: Ocala, Florida
Name:  CAM00055_zps2b058afe.jpg
Views: 60
Size:  216.9 KB

Name:  CAM00056_zps9fef4645.jpg
Views: 66
Size:  164.3 KB

Last edited by FinishThaGame; 10-29-2013 at 03:27 PM.
Old 10-30-2013 | 12:29 PM
  #85  
FinishThaGame's Avatar
Thread Starter
Registered User
 
Joined: Apr 2013
Posts: 231
Likes: 0
From: Ocala, Florida
Took a video of me going up a hill in 4 low in 1st in idle, no gas pedel. Was longer but my wife's phone kept getting calls, so ill try again another time.

[IMG][/IMG]

Last edited by FinishThaGame; 11-03-2013 at 06:20 AM.
Old 11-03-2013 | 06:27 AM
  #86  
FinishThaGame's Avatar
Thread Starter
Registered User
 
Joined: Apr 2013
Posts: 231
Likes: 0
From: Ocala, Florida
I went out the other day and took some action pics, these little drop offs are alot stepper then they seem in the pictures, but here they are.

Also included some side shots by request. And some shots of the exhaust, which im very happy with and get alot of compliments driving around town.

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

I took a nice long video of my exhaust and doing a burnout, but my wife erased them, grrrrrrr. Have to take another one soon.
Old 11-03-2013 | 06:31 AM
  #87  
FinishThaGame's Avatar
Thread Starter
Registered User
 
Joined: Apr 2013
Posts: 231
Likes: 0
From: Ocala, Florida
Got my Redline MT-90 in and changed it out, i noticed that its definitely smoother and the thing that i like is that it stays cooler and my gears dont get hard to change whenever im offroad and switching gears alot, before it would almost lock up and wasnt able to switch into gear. What do ya'll recommend in the t-case and diffs? Should i use the MT-90 as well, i have no problem spending money on a quality product if its gonna help, i do haul stuff sometimes so i definitely wanna have it in the rear diff unless there is a product that is good and cheaper since there is no brass....
Old 11-03-2013 | 04:17 PM
  #88  
Teuf's Avatar
Registered User
 
Joined: Apr 2009
Posts: 5,592
Likes: 24
From: Dixon, Ca
Yes in the transfer case, and I do not think its suitable for differentials. Read the bottle or google to make sure..... I run t6 in my gear box n T case.
Old 11-03-2013 | 05:05 PM
  #89  
FinishThaGame's Avatar
Thread Starter
Registered User
 
Joined: Apr 2013
Posts: 231
Likes: 0
From: Ocala, Florida
Well the title or "label" says "MANUAL TRANSMISSION AND TRANSAXLE GEAR LUBE" would transaxle be the differentials? I will google it also.
Old 11-03-2013 | 05:40 PM
  #90  
FinishThaGame's Avatar
Thread Starter
Registered User
 
Joined: Apr 2013
Posts: 231
Likes: 0
From: Ocala, Florida
Looks like Heavy Shock proof for T-Case and 75w90 GL-5 for diffs, all Redline products.
Old 11-03-2013 | 06:53 PM
  #91  
Rowdydudeman's Avatar
Registered User
 
Joined: May 2013
Posts: 400
Likes: 0
From: San Antonio, Tx.
looks good. I wish mine was as pretty as yours. one day it'll look as good as i want it to. one day...
Old 11-04-2013 | 02:00 AM
  #92  
FinishThaGame's Avatar
Thread Starter
Registered User
 
Joined: Apr 2013
Posts: 231
Likes: 0
From: Ocala, Florida
Thanks, im probably gonna paint it OD green or do a camo wrap, not sure which route to go. Ive even thought of painting it Tractor Green, cause tractor paint is supposed to last along time from what ive heard....
Old 11-04-2013 | 06:25 AM
  #93  
Rowdydudeman's Avatar
Registered User
 
Joined: May 2013
Posts: 400
Likes: 0
From: San Antonio, Tx.
ive been torn between two of my favorite color schemes. Marpat woodland, or desert! XD It may be a little moto, but i was a grunt for 5 years so its hard for me to resist. plus, i think it would look pretty cool (albeit exceedingly time consuming) and very original/unique.
Old 11-04-2013 | 06:26 AM
  #94  
Rowdydudeman's Avatar
Registered User
 
Joined: May 2013
Posts: 400
Likes: 0
From: San Antonio, Tx.
the biggest thing when it comes to paint longevity is the prep work to make sure no surface rust will form underneath, and the clear coat(s) to lock everything in.
Old 11-04-2013 | 06:37 AM
  #95  
FinishThaGame's Avatar
Thread Starter
Registered User
 
Joined: Apr 2013
Posts: 231
Likes: 0
From: Ocala, Florida
That would look pretty badass. The main thing that im also concerned with is scratch resistence, because i frequent 4-wheeler trails and am always scracthing the hell out a my paint.....
Old 11-04-2013 | 12:24 PM
  #96  
Gizler00's Avatar
Registered User
iTrader: (1)
 
Joined: Aug 2007
Posts: 3,276
Likes: 7
From: Pennsylvania
Man every time I look at your thread it makes me want to get another 3rd gen!!!

Im liking the exhaust outlets in the bumper, looks sweet.

And that side shot looks GREAT!! I need to get 35's!!

My vote goes to the OD green paint with Black rims.
Old 11-04-2013 | 12:31 PM
  #97  
FinishThaGame's Avatar
Thread Starter
Registered User
 
Joined: Apr 2013
Posts: 231
Likes: 0
From: Ocala, Florida
OD flat with black flat rims, that sounds sweet.....

I would upload alot more pics and videos but im. 90% of the time by myself. I had to pull a kid in a 2WD Ranger, lol, he went straight into a hole right across from my property, i remembet those days of 2wd wheeling!!
Old 11-04-2013 | 12:40 PM
  #98  
Gizler00's Avatar
Registered User
iTrader: (1)
 
Joined: Aug 2007
Posts: 3,276
Likes: 7
From: Pennsylvania
Originally Posted by FinishThaGame
OD flat with black flat rims, that sounds sweet.....

I would upload alot more pics and videos but im. 90% of the time by myself. I had to pull a kid in a 2WD Ranger, lol, he went straight into a hole right across from my property, i remembet those days of 2wd wheeling!!
Oh yes I have been there. 2wd wheeling with the ladies. Trying to be cool and then getting buried. Sure made for some fun nights. HAHA..

Stupid rangers.
Old 11-04-2013 | 12:51 PM
  #99  
FinishThaGame's Avatar
Thread Starter
Registered User
 
Joined: Apr 2013
Posts: 231
Likes: 0
From: Ocala, Florida
Thats funny cause he had 2 chicks with hime, they were hot too, and when i drove over to him they were like "this is the 3rd time weve been stuck in the last 24 hours" and it made me think of all the times ive been stuck when my wife was with me, lol.

I second the "stupid rangers" comment. Especially cause i had a mazda B3000 and a B2500 and have buried both of them out in the woods many times.

Quick question, how hard is it to remove and install new gastank in these things?
Old 11-17-2013 | 09:12 AM
  #100  
FinishThaGame's Avatar
Thread Starter
Registered User
 
Joined: Apr 2013
Posts: 231
Likes: 0
From: Ocala, Florida
So last weekend i ran into the PO at Tractor Supply. Ya'll were right they are 5.29 gears!!!!! i had a feeling also.

Also found out that when he sold this truck to the dealership that i bought it from that the new engine only had 25k miles on it, i am stoked about that, ive put about 10-11k since i bought it, and now i know that it will be running for a long time. And i did get his phone number since im sure ill have more questions for him.

Gas tank is in, but my work is so slow right now i cannot afford to pay my buddy for the tank....... so im filling 5 gallons at a time grrrrrrr.

I did install some window cranks so now i dont have to use a vice grip to open and close my window, lol.

Thread Tools
Search this Thread
Quick Reply: Beast in the making...



All times are GMT -8. The time now is 03:58 PM.