95blackToy's 1995 Pickup Build-Up Thread
Aug 4, 2010 | 01:17 PM
#21
Thread Starter
Registered User
Joined: Dec 2009
Posts: 754
Likes: 0
From: Pearland, Tx
i just went out and looked it over real good. I really have no clue and didn't find any grinding or anything. i think it unbolts then you just have to get it upholster. I will ask him next time i am there
Aug 10, 2010 | 02:01 PM
#25
Thread Starter
Registered User
Joined: Dec 2009
Posts: 754
Likes: 0
From: Pearland, Tx
Well i still havent made it out to the guy to cover the center console but i am almost done with it. All i have to do is finish some sanding on the lid to make it smoth and rounded
Aug 11, 2010 | 07:59 PM
#27
Registered User
Joined: Feb 2010
Posts: 46
Likes: 0
From: Sonora, CA
Alright guys i dont have pictures of everything. Especially of stuff while working on it. But here goes
Cb/PA radio No antenna yet. Also K&N
Bought some new wheels and tires
Most of my other pictures are on my old phone that was ruined when i dropped it in the water. But i also have a magnaflow Hi-flow cat and muffler,Zuk mod, Head gaskets were done a while back.I took my mud flaps and taped them off and repainted 4WD on them and put TOYOTA above that, looks really slick.
I got the interior apholsterd and the dude rebuit the bench seat and mad it into buckets
Here is the exhaust. Its off my phone so its not very clear and is louder on a better camera,thats just what i had to work with. I cant figure out how to post videos but here is a link.Sorry guys.http://www.youtube.com/watch?v=O3SgSgyer1A
Here is the whole truck
Soon to get armor hopefully, and a suspension lift eventually.
Hows it look guys?
Cb/PA radio No antenna yet. Also K&N
Bought some new wheels and tires
Most of my other pictures are on my old phone that was ruined when i dropped it in the water. But i also have a magnaflow Hi-flow cat and muffler,Zuk mod, Head gaskets were done a while back.I took my mud flaps and taped them off and repainted 4WD on them and put TOYOTA above that, looks really slick.
I got the interior apholsterd and the dude rebuit the bench seat and mad it into buckets
Here is the exhaust. Its off my phone so its not very clear and is louder on a better camera,thats just what i had to work with. I cant figure out how to post videos but here is a link.Sorry guys.http://www.youtube.com/watch?v=O3SgSgyer1A
Here is the whole truck
Soon to get armor hopefully, and a suspension lift eventually.
Hows it look guys?
Last edited by Sannoman; Aug 11, 2010 at 07:59 PM. Reason: i didnt like how i said it
Aug 11, 2010 | 08:46 PM
#28
Thread Starter
Registered User
Joined: Dec 2009
Posts: 754
Likes: 0
From: Pearland, Tx
thanks man. I like it there. Since the cab is small its plenty loud and i kinda like having it in the back. I also replaced the front speakers. but in my opinion they are like tweeters, since they are to small to handle anything above treble.
Aug 15, 2010 | 01:40 PM
#31
Registered User
Joined: Aug 2010
Posts: 28
Likes: 0
looks good man u build it yourself? and are you gonna have it covered same as the upholstery? what size tires are those? im lookin to put some new wheels and tires on mine just seein what will fit under a stock suspension.
Aug 15, 2010 | 01:46 PM
#32
Thread Starter
Registered User
Joined: Dec 2009
Posts: 754
Likes: 0
From: Pearland, Tx
Yeah built it all myself. And yeah gonna get the dude that did the seats to cover it. I think itl probable be vinyl on the sides and cloth on the top. I still got to take the headrests back to him and he is gonna put a Toyota emblem on them. Went through about 20 electric sander sheets. My wheels are 31" I think its possible to put 32" tires on if you cut something or pound something, just cant seem to remember what i read about that.
Aug 15, 2010 | 04:40 PM
#35
Registered User
Joined: Aug 2010
Posts: 28
Likes: 0
yea i thought the 32's would rub, that console is gonna look sick when u get it done. hey got another question what bolt pattern are these trucks, i know they are six lug but dont know the numbers? 95 how much where those wheels and tires run u they look are pretty slick lookin
Aug 15, 2010 | 05:48 PM
#37
Thread Starter
Registered User
Joined: Dec 2009
Posts: 754
Likes: 0
From: Pearland, Tx
pretty sure it was the valence. it only rubbed when i hit a bump off road. it wasn't worth cutting the valence or anything
yea i thought the 32's would rub, that console is gonna look sick when u get it done. hey got another question what bolt pattern are these trucks, i know they are six lug but dont know the numbers? 95 how much where those wheels and tires run u they look are pretty slick lookin
Aug 15, 2010 | 06:06 PM
#39
Thread Starter
Registered User
Joined: Dec 2009
Posts: 754
Likes: 0
From: Pearland, Tx
Yeah dude get after it. And thanks. Its off to be covered soon hopefully I just got to get down there. Its on the complete other side of town. Then wait a few days and it will be done. I will be sure to post the final product and when its all mounted up.
Aug 15, 2010 | 09:45 PM
#40
Registered User
Joined: Aug 2007
Posts: 5,334
Likes: 4
From: Vian, OK
make sure he pads the hell out of the lid..LOL
well..i'd have to have it padded..cuz i always lean on my center console lol
i'm gonna have the lid on my 4runner center console repadded....cuz it's not soft enough lol.
i'm in love with your interior as well though bro...very nice!
well..i'd have to have it padded..cuz i always lean on my center console lol
i'm gonna have the lid on my 4runner center console repadded....cuz it's not soft enough lol.
i'm in love with your interior as well though bro...very nice!
