88redyota

did a 1/2 ton chevy master cylinder swap to help with the breaking issues i had should be all better once they get completely bled.

88redyota

finally finished the back of the frame cut the frame down the match the bed lenght had to remove the stock cross-member that holds the spare tire in it is now replaced with a pcs of 2x3 (.1875 wall) tubing and put a receiver hole (2.5sq tubing .25 wall) in it to hold my shackle mount. now just need to add taillights. but that is down the road.

86bedlesstoy

Bed looks great. I'm thinking a close design to mine. Hmmmm Keep up the good work.

86bedlesstoy

Where did you get those motor mounts?

88redyota

i made them

88redyota

trimmed some fat from the front fenders that should keep from tearing up mi nice tires and trimmed back the front bumper.

Z's Confederate Toy

Looking pretty much awesome!!! I like that bed that you built especially.

88redyota

im getting mixed reactions on the bed cause i did square vs round tubing but then again i dont have a bender or i would have done round.

Z's Confederate Toy

Taint nothing wrong with square, its original. You did what you could with the resources that you had. Thats the coolest thing, I think.

88redyota

did my shack down run at a local park called jeepskool

88redyota

86bedlesstoy

Great build! Did the stacked old leafs make a stiff ride? Thinking of doing this to fix my rear sag in my 86' rear leafs

88redyota

my ride is really soft from what i can tell but it a trailer queen.