algranger's 1984 Pickup Build-Up Thread
#223
Registered User
Thread Starter
Yeah whatever
#226
Registered User
I wish I will be at work all weekend pulling 12hr shifts and you can still swing by when ever I'll have something for ys to drink..And as soon as I get everything squared away on my 4runner I want to take it out.
#228
Registered User
Thread Starter
I'll help ya out gettin the runner ready for wheelin if you want a hand
#229
Registered User
No I live in that new Quadrant neighborhood I am pretty sure I need a new e-brake cable and the e-brake will work and still need to figure out why one rear brake is dragging even with the adjuster all the way in. Also where did you get your steel for your back bumper. I might pick some up soon for a set of sliders.
#231
Registered User
Thread Starter
No I live in that new Quadrant neighborhood I am pretty sure I need a new e-brake cable and the e-brake will work and still need to figure out why one rear brake is dragging even with the adjuster all the way in. Also where did you get your steel for your back bumper. I might pick some up soon for a set of sliders.
My buddy gave me the steel but Tacoma Steel is the place to go.. you will only be able to get 20' segments though
Haha it was out in some far corner by a gate.. you really dont wanna mess around in there rob had a hard time pulling me out and he was on flat dry ground. I dug deep
#238
Registered User
Join Date: Feb 2007
Location: Sierra Nevada's or the Deserts of Las Vegas
Posts: 2,203
Likes: 0
Received 0 Likes
on
0 Posts
#239
Registered User
I am wanting to do a rear bumper like yours but put a receiver right in the middle. I have a guy lined up to build it and sliders for a undertimined price as long as I supply materials I have priced the steel for my sliders and it it about $50. I need to check with Tacoma steel I got a price from Greer Steel.
Last edited by Lunnzz; 05-04-2009 at 04:13 PM.
#240
Registered User
I am wantinf to do a rear bumper like yours but put a receiver right in the middle. I have a guy lined up to build it and sliders for a undertimined price as long as I supply materials I have priced the steel for my sliders and it it about $50. I need to check with Tacoma steel I got a price from Greer Steel.