When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Does this have an electric speedometer? Is the cluster functional & for sale? How much if so, shipped to 54911?
Originally Posted by ZARTT
I bought a 95 3VZE Runner for body parts to repair my car.
Rust free, no hit AZ. car. Motor overheats, probably bad HG, but no water/oil mix yet.
Ran OK when I loaded it onto the rollback.
Interior is grey, and good, except for worn driver seat, I can't ship the seats, so for local pickup only.$150.00 for the front and rear seats.
dashpad has the three splits in the usual places.
Windshield is going into my car, as is most of the front clip stuff
Tailgate is rust free, good glass, and works OK. $150.00
Doors are $125.00 apiece, all 4 for $400.00
Let me know what you need.
I am in Zip 94553 San Francisco Bay Area
How’s the rear bumper? Is that something you would part with/ship? 77624. Also I need the seat reclining handle for the drivers side. And any of the little black a/c control knobs. Mine new toy is missing them. Maybe center console lid? Lemme know.
HI:
I have the center section, 2 passenger side wings, and 1 driver side wing.
The driver wing marked #1 is 99% perfect (no dimples)
The passenger side wings each have dimples on the corners marked #2 & #3.
The center is straight, and all of the chrome is OK for a 25 year old car. The plastic step could be painted, or freshened up.
Do you want the mounting brackets? (still on the car)
I'll look in the shop for the handle, and the dash buttons and put them in a baggie.
I'll pack and ship to you, but I can't quote a rate till it is packed and weighed.
I've done this many times and so far UPS ground is the least expensive, and the most reliable.
I will ask for $175.00 plus packing and shipping.
Art.
My intention was not to waste your time, but I happened across a local bumper. However, I do want the interior parts. Do you happen to have a center console lid?
Orrin:
I removed the shift indicator from my D/D.
I have enclosed a photo to show you the condition of the items.
Let me know what you want to do.
Also P.M. your name and address to me for purposes of shipping.
Thanks
Art.
Do you have the rear window control plate on the center console? It controls the back window, rear wiper and rear window lock? Send pictures if you do.
On my donor 1995 4Runner the rear wiper is controlled by the wiper stalk on the steering column.
The rear window raising, and lowering is controlled by either the key switch on the tail gate, or the up/down switch on the console aft of the shifter.
There is no separate lock system for the window glass other than the fact that it is up, and can't be lowered without a key.
On my donor 1995 4Runner the rear wiper is controlled by the wiper stalk on the steering column.
The rear window raising, and lowering is controlled by either the key switch on the tail gate, or the up/down switch on the console aft of the shifter.
There is no separate lock system for the window glass other than the fact that it is up, and can't be lowered without a key.
Send me a picture of the switches behind the shift levers, please.
The panel may have been separate from the console during manufacture, but not now.
It has been plastic welded, or epoxied, or whatever when the vendor built it.
There are no screws or fasteners.
Here is a picture of the bottom.
Hi:
I would bet that if you found a console that had a good switch panel in it,
you could slice it out with a thin Dremel wheel.
Then leave enough of a ledge on the recipient after Dremelling it, to accept the replacement, a little super glue, and you are gold.
n'est-ce pas?
Art.
Jun 11, 2020 | 08:08 PM
Panel
