YotaTech Forums

Notices
Vehicles - Parting Out Parting out a vehicle, post it here

FS[PacNorWest]: Parting 1988 SR5 V6 4RUNNER

Thread Tools
 
Search this Thread
 
Old May 25, 2014 | 06:21 PM
  #41  
amites's Avatar
amites
Registered User
 
Joined: Mar 2014
Posts: 51
Likes: 0
From: Boulder, CO
Still have the harness?

I need a starter signal connector if its been cut could probably come up with something to go with it to make it worth your while
Reply
0
Old May 27, 2014 | 09:22 AM
  #42  
dirtnerd's Avatar
dirtnerd
Registered User
 
Joined: Mar 2014
Posts: 19
Likes: 0
From: Syracuse, NY
do you have a cruise control cable?
Reply
0
Old Jun 2, 2014 | 08:40 AM
  #43  
4x4-runner's Avatar
4x4-runner
Thread Starter
Registered User
iTrader: (2)
 
Joined: Apr 2010
Posts: 375
Likes: 0
Bump...
Reply
0
Old Jun 3, 2014 | 03:03 AM
  #44  
peabody's Avatar
peabody
Registered User
iTrader: (1)
 
Joined: Nov 2012
Posts: 126
Likes: 0
From: Central PA
Can you send me an image of the passenger side fuel hard line, tank to engine compartment?
Reply
0
Old Jun 16, 2014 | 05:42 AM
  #45  
rumdumb's Avatar
rumdumb
Registered User
 
Joined: Dec 2013
Posts: 52
Likes: 0
Do you have the map light cover?
Reply
0
Old Jun 16, 2014 | 08:01 AM
  #46  
kinsey.clay's Avatar
kinsey.clay
Registered User
 
Joined: Jan 2013
Posts: 33
Likes: 0
From: Fort Collins, Colorado
Hi, do you have hinges foe the backrests of the rear seat? Would only have them if it's the 2 piece seat, I have all other brackets just needed those! If you do how much for them?
Reply
0
Old Jun 30, 2014 | 08:52 AM
  #47  
catch847's Avatar
catch847
Registered User
 
Joined: Jun 2014
Posts: 7
Likes: 0
leaf spring packs, shipped to 54820?
Reply
0
Old Aug 22, 2014 | 05:53 PM
  #48  
HCott's Avatar
HCott
Registered User
 
Joined: Aug 2014
Posts: 25
Likes: 0
From: Upstate SC
Looking for gas tank door with hinge?
Reply
0
Old Sep 7, 2014 | 05:24 PM
  #49  
4x4-runner's Avatar
4x4-runner
Thread Starter
Registered User
iTrader: (2)
 
Joined: Apr 2010
Posts: 375
Likes: 0
Bump...
Reply
0
Old Sep 7, 2014 | 06:41 PM
  #50  
Kelly00127's Avatar
Kelly00127
Registered User
 
Joined: Jun 2011
Posts: 54
Likes: 0
From: Aberdeen, SD
Hello,

I need a parking brake cable and the cover that is below the dash under the glove box, where you can access the heater core. Let me know

Kelly
Reply
0
Old Sep 7, 2014 | 08:55 PM
  #51  
4x4-runner's Avatar
4x4-runner
Thread Starter
Registered User
iTrader: (2)
 
Joined: Apr 2010
Posts: 375
Likes: 0
Originally Posted by Kelly00127
Hello,

I need a parking brake cable and the cover that is below the dash under the glove box, where you can access the heater core. Let me know

Kelly
Are you talking about the one that covers the speaker and has vent holes across it?
Reply
0
Old Sep 8, 2014 | 04:13 PM
  #52  
peabody's Avatar
peabody
Registered User
iTrader: (1)
 
Joined: Nov 2012
Posts: 126
Likes: 0
From: Central PA
Send unit, 9" flex, and lengthy hardline to engine bay
Hey, I need the dang sending unit (pipes rusted), flex line, and if possible the long one from flex line running along frame to engine bay. Thanks. Don't need the fuel pump if you want to sell it elsewhere.
Attached Thumbnails Parting 1988 SR5 V6 4RUNNER-img_3280.jpg   Parting 1988 SR5 V6 4RUNNER-img_3282.jpg   Parting 1988 SR5 V6 4RUNNER-img_3283.jpg  
Reply
0
Old Sep 9, 2014 | 08:41 AM
  #53  
4x4-runner's Avatar
4x4-runner
Thread Starter
Registered User
iTrader: (2)
 
Joined: Apr 2010
Posts: 375
Likes: 0
Originally Posted by peabody
Hey, I need the dang sending unit (pipes rusted), flex line, and if possible the long one from flex line running along frame to engine bay. Thanks. Don't need the fuel pump if you want to sell it elsewhere.
PM sent
Reply
0
Old Sep 9, 2014 | 08:56 AM
  #54  
MaK92-4RnR's Avatar
MaK92-4RnR
Registered User
 
Joined: Mar 2008
Posts: 6,059
Likes: 101
From: Sacramento, CA
Im looking for the ash tray + the aluminum bracket with it and a center console lid + brackets as well. PM me details, please
Reply
0
Old Sep 10, 2014 | 09:28 AM
  #55  
4x4-runner's Avatar
4x4-runner
Thread Starter
Registered User
iTrader: (2)
 
Joined: Apr 2010
Posts: 375
Likes: 0
Originally Posted by MaK92-4RnR
Im looking for the ash tray + the aluminum bracket with it and a center console lid + brackets as well. PM me details, please
I don't have center console lid or hinges. However I do have the ashtray mount. I'll have to double check on the ashtray
Reply
0
Old Sep 11, 2014 | 11:48 AM
  #56  
4x4-runner's Avatar
4x4-runner
Thread Starter
Registered User
iTrader: (2)
 
Joined: Apr 2010
Posts: 375
Likes: 0
Bump....
Reply
0
Old Sep 12, 2014 | 08:30 AM
  #57  
4x4-runner's Avatar
4x4-runner
Thread Starter
Registered User
iTrader: (2)
 
Joined: Apr 2010
Posts: 375
Likes: 0
Bump...
Reply
0
Old Sep 13, 2014 | 11:52 AM
  #58  
4x4-runner's Avatar
4x4-runner
Thread Starter
Registered User
iTrader: (2)
 
Joined: Apr 2010
Posts: 375
Likes: 0
Bump...
Reply
0
Old Sep 14, 2014 | 04:25 PM
  #59  
4x4-runner's Avatar
4x4-runner
Thread Starter
Registered User
iTrader: (2)
 
Joined: Apr 2010
Posts: 375
Likes: 0
Bump...
Reply
0
Old Sep 17, 2014 | 05:20 PM
  #60  
Kelly00127's Avatar
Kelly00127
Registered User
 
Joined: Jun 2011
Posts: 54
Likes: 0
From: Aberdeen, SD
Name: IMG-20140912-00135_zps06b89618.jpg Views: 102 Size: 66.5 KB
Originally Posted by 4x4-runner
Are you talking about the one that covers the speaker and has vent holes across it?
It the Evaporator Duct delete

Name: IMG-20140912-00137_zps6fbb96e1.jpg Views: 81 Size: 94.1 KB
Reply
0



Advanced Search

All times are GMT -8. The time now is 08:38 PM.