When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
never saw any pics of the ARB 5.29 with the chipped tooth..
V6 or 4 cyl
still got it?
4cly,
Havent pulled it yet,
Been busy fixing other cars an
heres the piece that sell out when I drained it...(not the dime)
d still trying to get this project back up.
Here's a photo of where the trim would cover. I need 4 pieces total, 2 on each side.
The trim runs under the sliding window and covers the bolts holding on the cap.
Would you have the inner window seals. I need it for an '82 with the vent window...I'm curious if the ones from your red unit would work.
I'm pretty positive the doors are the same... (with vent window)
Are you talking about the hole seal that goes around the window? or just the straight flat one that clips on the door inside ?
I'm pretty positive the doors are the same... (with vent window)
Are you talking about the hole seal that goes around the window? or just the straight flat one that clips on the door inside ?
The straight flat piece of weather strip that seals right up to the window and has a little notch where your inside door lock knobs are and yes, clips to the door inside. There is an inner seal and an outer seal that look very similar (about 19" in length)...I need the inners.
Thanks!
Last edited by medicmoose; Sep 29, 2017 at 03:47 AM.
DO you have the antenna available? Id take the whole assembly if so. Also, need a pass. side mudflap.
Shattered the antenna trying to get that old thing off... pretty sure they sell them online new pretty cheap... I've got a good right hand side mud flap off the 85 runner
Anybody in this area wanna do a toyota build or need more parts,
I've got an 87 4runner frame decent shape, rear axle drums brakes are rebuilt and worked fine, blistin shocks, driveshafts, manual hubs I also have a solid glass window... will sell either for $120
frame with ifs... manual hubs, rear drum brake are fully rebuilt, I've got most the steering parts and power steering pump, alternaters ect
-I've got a bobbed truck bed with tool box,
-Set of oem front solid axle shafts,
-gauge clusters, 84-90 multiple clusters
-rear windows p/u
- 84+ transmission bell housing, brand new
.... will ad pics and prices as I go....
Okay, I know nothing about autimotive ac. the condenser is the big radiator thing in the front, what's the evaporator?
I sold the ac set up that was in the 85, but the 87 had working ac before it was rolled. So I'd have to check. If I have that line in good condition. (I just need to know what line)
It is the hard line i circled (it runs all the way to the front condenser [in front of radiator]). The evaporator is in the dash. That hard line connects to a line inside the dash to the evaporator. I need both hard lines if they are in good shape.
Sep 20, 2017 | 02:18 PM
